Amateur Radio

Over the past week I've been attempting to work out what the IARU, the International Amateur Radio Union, actually does and how it works. I started looking into this because the IARU is this year celebrating a century since its foundation in 1925. You might think of the IARU as one organisation, but behind the scenes there are actually four, one for each so-called "Region" as well a Global organisation called the International Secretariat, headquartered at the ARRL in Connecticut.

The Regions have been negotiated by members of the ITU, the International Telecommunications Union. As early as 1927 the ITU documented differences in frequency allocations between Europe and Other Regions. In Cairo in 1938 it defined boundaries for Europe. In Atlantic City in 1947, the ITU defined three Regions, with specific boundaries, essentially, Europe and Africa, the Americas and the rest of the world.

As a surprise to nobody, this is purely a political decision, especially since radio waves don't get to have a passport and pass border control. The impact of this continues today, generations later. We still have this patchwork of frequency allocations, we still have exclusions, different band-edges and other anachronisms.

The Regions are further divided into Zones. When you start looking at the ITU zone map in detail it gets weird. For example, Iraq is in Region 1, neighbouring Iran has been specifically excluded from Region 1 and moved to Region 3. In case you're curious, Iran has been represented at the ITU since 1938.

Antarctica is part of seven of the 90 ITU zones and all three Regions, because of course it is.

Zone 90, jammed between zones 35, 45, 61, 64, 65 and 76, almost as an afterthought, contains one landmass, Minamitorishima, an island that sticks 9 m above the water, has a 6 km coastline and is generally off-limits to the general public. The nearest land in any direction is over 1,000 km away. It's got an IOTA, Islands On The Air, designation, OC-073 and despite its isolation, has been activated by radio amateurs using JD1 prefix callsigns.

I live in Australia, ITU zone 58, part of Region 3, together with the two most populous countries on the planet, India and China and the rest of eastern Asia, but not the Former Soviet republics and most, but not all of Oceania, you know, because .. logic. From a population perspective Region 3 is the largest by several orders of magnitude, but you'd never know it if you went looking.

Why am I telling you all this?

Well, that's the international stage on which the IARU is representing amateur radio. In 1927 the underlying assumption was that each service, Amateur Radio included, had a global exclusive allocation. The reality was different. Spectrum was in such short supply that individual exceptions were carved out, which as I've said resulted in splitting up the world into regions, starting in 1938 and codified in 1947.

The IARU in 1925 is a different organisation from what it is today. In 1925 individual amateurs could become members. As soon as enough members from a country joined, they'd be grouped together. When there were enough groups, the IARU became a federation of national associations.

Over time, the IARU as a single body, evolved into the structure we have today. In 1950 in Paris, the IARU Region 1 organisation was formed. In 1964 in Mexico City, IARU Region 2 was created and in 1968 in Sydney, IARU Region 3 came to exist. You can see their online presence at the various iaru.org websites.

How it works is no clearer now than it was when I started. What it has achieved is equally unclear. I'm currently trolling through ITU World Radiocommunications Conference documentation going back to 1903 to discover references to Amateur Radio, but it's hard going. At least it's something. The IARU documentation is not nearly as extensive or up to date.

It appears that many, if not all, of the people working behind the scenes at the various IARU organisations are volunteers. If you feel inclined, there is an ongoing request for assistance, and before you ask, yes, I looked into helping out, but that will have to wait until funds permit.

If you have insights into the functioning of the IARU, don't be shy, get in touch. [email protected] is my address.

I'm Onno VK6FLAB

#ARDC

Australian Research Data Commons

meet

Amateur Radio Digital Communications

Gotta love acronyms..

So you got your technician's license? You get to do such fun activities as: call out on simplex FM voice for no one to respond or talk to the 70-year-old+ "repeater guys" who are on every day from 6 am - 6 pm about uhhhh radios, grilling, ex-wives if you want..... and then listen to the silence when everybody runs out of things to talk about in the presence of an "outsider" (someone who hasn't been on the repeater every day for 10+ years).

Not interested? That's fine, instead you can just listen to the activity on the repeater when they think no one else is around and hear interesting conversation topics like what the repeater guys would do if someone they were dating had an abortion including, but not limited to, "putting 2 between their eyes".

Not interested in even that? Okay, if your radio is capable of digital operation, you can connect to a system of linked repeaters and make contact with a different set of 70-year-old+ repeater guys. Once you make contact and talk a bit (maybe even have a good time listening to their stories if you're into that), you can look up their callsign and find their Twitter and find out they're REALLY RACIST and that probably the only reason they spoke to you in a polite manner or at all is cuz you have a "normal-sounding" male voice.

If this is what the self-policing culture of amateur radio is like (at least where I am in the United States currently) then we need to give many, many more Baofengs to unlicensed zoomers immediately

Anyway, that has been my experience so far in a rural area in the US. It hasn't been all bad (making contact with the International Space Station was cool) but yeah. I'm going back to a city soon, maybe it will be better there.

I really do want to get into this hobby and I love the technology (need to find the money sometime to do more packet stuff) but a lot of this type of stuff has been off-putting

I had no luck, couldn't hear anything and they (they includes their computers lol) couldn't hear me even though I had perfect line of sight to the station

I heard they have an APRS digipeater and other amateur radio equipment on board... maybe they turned it off recently or something

Info is sparse on the English-speaking internet

20m at 1500Z.

Side note: for the last three days I’ve enjoyed nearly bottomless noise floors; been making SSB QSOs to Japan, Indonesia, and even Rarotonga. Then–today of all days–the AirBnB beside my house has turned on their aircon and it’s completely wiping out all but the strongest signals. My waterfall looks like college ruled notebook paper:

1830Z Update:

1900Z. This is wild.

So, I have a confession. I don't know everything. Shocking right?

Over the past too many months, actually, come to think of it, years, I have not been on-air with my station on HF using FT8 or Olivia, modes that use tools like "WSJT-X" and "fldigi". This has not always been the case. For a time I used a tiny computer running those tools. It had plenty of issues related to its size and capacity. Overwhelmingly it was slow, unsurprising since it was released in 2009. After one particularly frustrating session where I had to recompile WSJT-X on an older 32-bit operating system using an Atom processor, I decided that this was not helping me, and I put it away.

The idea was to use my main computer that could do all the heavy lifting without cracking a sweat. To make this happen the traditional way, I'd be expected to physically connect the radio to the computer. I'm not a fan of doing that, given the potential damage that RF could do to my computer, not to mention that I have a sit-stand desk on wheels that I move around my office as the mood or the light takes me, if you're interested, I found a mobile lectern that the computer is clamped to. Works great, been using it for years.

RF aside, moving around the office is not conducive to plugging in a radio that comes with power, coax, audio, control, microphone and expects to have some space around it to actually use it. No problem, I have a RemoteRig, a device that comes in two parts. You connect one unit to the radio, the other to the head, that is, the removable faceplate of the radio, and using a network connection, you can have the head in one place and the radio in another. The two units don't have to be in the same room, let alone the same country.

I figured that I could replace the second half of the system, the head and its unit, and instead use software on my computer to get the same functionality and be up and running in minutes. That was several years ago. Interestingly, whilst I'm putting this together I did a search for "RemoteRig protocols" and learnt a few things, so perhaps this path isn't quite as dead as I feared. I've reached out to Mikael SM2O and if that comes to anything I'll let you know.

In the meantime I've been trying to figure out how to operate my radio in software only. I can control the radio if I physically connect a computer like a Raspberry Pi to it and use "rigctld" to interact with it. This gives me access to all the standard CAT, or Computer Assisted Tuning commands. In other words, I can change band, mode, frequency, trigger the transmitter, all the stuff that you need to get on-air to make noise.

There's only one bit missing, the noise, as-in audio, either coming from the radio, or going to it. I suppose I could trigger a carrier and use it to send Morse, but that doesn't give me receive capability. I've tried using network audio using "pulseaudio" - it never worked right. I've made USB hot-plug scripts that allow you to connect a USB device into a computer and access it across the network on another computer - it mostly works for sound, but reliable is not a word I'd use. I've looked at using the USB sound card in the audio mixer on my desk, but it's subject to all manner of funky restrictions and random audio dropouts. I could use a virtual screen and connect to a Raspberry Pi that's physically connected to the radio, but that's leaving all the hard work on the Pi, rather than the computer that I'm currently using with several orders of magnitude more capability.

Whilst we're discussing this, one of the reasons I like the idea of a software defined radio like a PlutoSDR, is that the stuff coming out of the radio, and going into it for that matter, is already digital. It takes away a whole lot of complexity, admittedly replacing it with software, but that's where I feel more comfortable.

Which brings me to you.

As I said, I don't know everything.

What are you doing in this space? Are you actually on-air with your contraption, or is it still in the planning stages? Are you sending audio, or digital data across the network? Does your system have the ability to swap out a radio and replace it with something completely different? Do you rely on functions available on the radio, or could it be used for a 1950's valve radio, a twenty year old one, a current model, or any number of software defined radios without issues? Finally, is it Open Source?

I confess that I'm not holding my breath for an answer, but there is a chance that you're similarly intrigued by this collection of questions that you will poke your head above the fence and make yourself known.

I'm Onno VK6FLAB

Hello y'all, I recently got a cheap uv-5r off of Amazon so I could use APRS in a off the grid location, however I'm encountering a large set of problems with the radio.

First off all, I already tried the 3 finger unlock, doesn't work. Second off, I can program channels into it with chirp, but the radio will only beep if you press ptt. Only channels 1-30 will transmit, however if you change any of it in chirp it seems to revert back to gmrs.

Thanks for any help in advance.

The recent "incident" at the ARRL in which it disclosed that it was the "victim of a sophisticated network attack by a malicious international cyber group" brings into focus some serious questions around our community in relation to identity and privacy.

Let's start with your callsign. Right now in Australia you can use the official register to look for VK6FLAB. When you do, you'll discover that it's "Assigned to Foundation". That's it. No mention of who holds it, where it's registered or how to contact the holder, none of that.

In the case of my callsign, because I haven't surrendered my apparently now legally useless license, you can still search the previous system, the Register of Radiocommunications Licenses and discover that it's held by me, but as soon as it expires, that record will vanish and the relationship between me and my callsign will be lost to the public.

Also, there are no dates associated with any of this. You cannot use the current or previous system to discover if I held my callsign in November 2010 or not. In case you're wondering, no, I didn't, I was licensed a month later. Right now if you look for VK6EEN on QRZ.com, you'll see that it's linked to CT1EEN, but when was that information last updated? I know for a fact that I became the holder in November 2020. It appears that Sam CT1EEN used it around the turn of the century, about 24 years ago, but precisely when and for how long, is unclear.

So, from a public disclosure perspective, the links between me and my callsigns are tenuous at best.

Before I continue, I will point out that this is not unusual. For example, you can see the number plate on my car as I drive down the street, but most people don't have the ability to link it to me.

Similarly, Ofcom in the United Kingdom released a list of allocated amateur callsigns after a freedom of information request. It's unclear if this information is updated, or if it requires a new request each time. Like Australia, the dataset contains the callsign, the type of license and when the record was last updated. Nothing else.

In contrast, the United States has a full license search that returns name, address, issue and expiry dates. Japan offers both a search tool and downloads. Interestingly you can see if a callsign was previously licensed and when, but not by whom.

No doubt each country has their own interpretation in relation to how this is handled and as was the case in Australia, this is ever changing.

This leaves us with an interesting phenomenon.

We use callsigns on-air to identify ourselves, but the relationship between the callsign and our identity, let alone when, is not guaranteed for a significant proportion of the amateur community.

So, how does this relate to the ARRL incident?

Radio amateurs like to make contacts with each other and collect those contacts like you might collect stickers or postage stamps. For decades we've used QSL cards, essentially a postcard sent from one amateur to another to confirm a contact. When you collect enough cards, you can apply for an award, like the DXCC, showing that you made contact with one hundred different so-called DX entities.

In the era of computing, some organisations, like the ARRL, came up with the idea of using the internet to exchange these contacts instead of using a postcard. This reduced delays and was presented as a system to make the process more secure by requiring that people electronically sign their contacts, but could only do so after identifying themselves using traditional means, like providing copies of their license, their passport, etc. The ARRL called it Logbook of the World, or LoTW, and it was adopted by the amateur community around the globe.

While the ARRL continues to state that it only holds public information on its member database, it has made no such assurances about the LoTW system. There is personal and private information that the ARRL has and there is no indication at all what happened to it.

Other systems such as QRZ, eQSL, Clublog and Hamlog offer similar systems with various levels of authentication and verification. A new player, HQSL, is confusing the issue by offering cryptographically signed QSL cards, boasting that their system is decentralised and not restricted to any single service, but immediately requires that you sign-up with Hamlog to get going.

So, we have several organisations offering electronic logging, contact confirmation and security which claim to guarantee that this callsign contacted that callsign at a time and date, on a band, using a mode.

One problem.

None of this is real.

For starters, there is no guarantee that the station operating VK6FLAB was me. There is also no record guaranteeing that I'm the holder of VK6FLAB, or any proof that I am who I say I am. There is also no guarantee that the person confirming a contact between VK6FLAB and you is me. So, we're creating a phantom secure system that's attempting to fix the wrong problem.

In golf, when you start playing for rankings, rather than a round at the 19th hole, the process used to verify your score is dependent on peer review. You cannot mark your own score-card, someone else does.

In amateur radio we've built this electronic house of cards to track whom we've talked to and when, but it's a mirage when looked at closely.

While a DXCC award is worth nothing more than a personal achievement, we cannot go on pretending that identity verification services like LoTW are real, nor can we continue to accept that organisations like the ARRL should demand and store valuable identity information.

I'm Onno VK6FLAB

I currently use a ~35' (~10m) fiberglass telescoping mast, and I love it. It's great when I hoist my 10m window line j-pole (thank you KB9VBR!) and now that I'm messing around on 20m, it's just too short. My SWR is a bit higher than it ought to be on account of ground reflection since I can't get the base of the radiating element more than about ~1m (~3') off the ground.

The antenna I use (currently, at least) is fairly lightweight, so I'm not worried about mast flexion since the wight will largely be just outside mast center.

I am not to deterred by cost, and I am trying to avoid metallic antennas for fear it will mess with my radiation patterns and SWR in a new way. I am greatly interested in telescoping options.

Are you familiar with fiberglass or carbon fiber masts which get the top to a definite 15m (~50')?

Nearly all of my operations are /P, so it really has to be fairly convenient. I recognize that these requirements may be a little mutually exclusive.

A lot of hams think the Automatic Packet Reporting System is a system for broadcasting your location, and maybe your status. But the APRS is really a lot of local general-purpose low-speed message-switched* networks joined together by the big Internet (the one we're on rn) into another inter-network.

*Yeahh, it says packet in the name and is based on AX.25, but really the APRS is only capable of routing complete messages

It's primitive compared to the Internet but still very useful because of how widespread it is (I'm in some place you could describe as the "middle of nowhere" rn and there are still internet-connected APRS stations and digipeaters in range). The APRS is source-routed, meaning the sender of packets specifies the route they take through the network. You can specify a direct route for your packets to take through the network but most people leave this routing information set to the default on their radio, which is usually something like WIDE1-N,WIDE2-N where N specifies the number of times a packet is rebroadcast by any forwarding-capable station (digipeater) in range (this is how your position and status beacons get distributed to a wide area).

If you're familiar at all with the history of the APRS then you know its original purpose was to distribute information of local interest and it still does this but is now capable of so much more. You can send and receive text messages (including to the phones of non-hams), e-mails, get weather information, find out when satellites pass over your area, check into APRS nets, subscribe to groups and bulletins, and more.

Even if you're truly in the middle of nowhere with nothing and no one around, you can still keep in contact with people and beacon your location via one of the satellites carrying internet-connected APRS stations, no commercial satellite subscription and proprietary radio required (don't rely on it though lol). Even the International Space Station has an APRS station aboard

https://adrelien.com/blog/meshtastic-diy-how-to-build-your-own-meshtatic-node-esp32-lora-radio/

https://adrelien.com/blog/what-is-meshtastic-full-guide-on-how-to-get-started/

If you've heard the phrase "shortwave listeners", you might have wondered what on earth that was all about.

It relates to the length of a radio wave used to transmit information. The length of a radio wave is tied to its frequency. The longer the wave, the lower the frequency.

When radio amateurs talk about bands, like for example the 40m band, we're talking about a range of frequencies where the wavelength is around 40m. From a frequency perspective, this is around 7 MHz. The 160m band, at about 1.8 MHz, or 1,800 kHz is considered the beginning of the short wave bands.

This implies that there are longer waves as well. If you've ever seen or owned a mid 1980's transistor radio, you'll have seen the notation MW, which stands for Medium Wave, today it's called the AM band. Older radios might have the notation LW, or Long Wave.

The medium wave band is a broadcast radio band that runs between about 500 and 1,700 kHz. The wave length is between 600 m and 170 m.

When radio was still in its infancy, there was also a popular long wave band, with wavelengths between 800 m and 2,000 m, or 150 to 375 kHz.

Today much of that has gone by the wayside. With the advent of digital radio, in Australia it's called DAB+, Digital Audio Broadcasting, the whole idea of "wave" has pretty much vanished.

Some countries like Japan and the United States are in the process of discussing the phasing out of the AM broadcast band. Much of that appears to be driven by car manufacturers who claim that the AM band is no longer useful or used, but forget to tell anyone that they really want to stop having to put AM radios in their cars because it's difficult to isolate the electrical noise from their modern contraptions in order to make it possible to actually listen to that band.

If you ask me, it's a good incentive to make electronics RF quiet, something which is increasingly important in our wirelessly connected world.

This might lead you to believe that all activity on air is moving to higher and higher frequencies, but that's not the case. The properties that made long wave and medium wave radio possible in the early 1900's are still valid today. For example, there are WSPR or Weak Signal Propagation Reporter beacons on the 2200m band, or at 136 kHz.

Whilst your RTL-SDR dongle might not quite get down that low, most of them start at 500 kHz, you don't need to spend big to start playing. My Yeasu FT-857d is capable of tuning to 100 kHz, plenty of space to start listening to the 2200m band, even if I cannot physically, or legally, transmit there.

If you want to build your own receiver, you can check out the weaksignals.com website by Alberto I2PHD where you'll find a project to build a receiver capable of 8 kHz to 900 kHz using a $50 circuit board.

If that's not enough, there's radio experimentation happening at even lower frequencies. Dedicated to listening to anything below 22 kHz, including natural RF, with a wavelength greater than 13 km, Renato IK1QFK runs the website vlf.it where you'll find receivers and antennas to build.

Given that most sound cards operate up to around 192 kHz, you can start by connecting an antenna to the microphone port of your sound card and use it to receive VLF or Very Low Frequencies. On your Linux computer you can use "Quisk" to tune.

There are VLF transmitters on air. For example, SAQ, the Grimeton Radio Station in Sweden opened on the 1st of December 1924. Capable of 200 kW, today it uses about 80 kW and transmits twice a year on 17.2 kHz.

While we search for higher and higher frequencies, there is still plenty of fun to be had at the other end of the radio spectrum. Consider for example that VLF or Very Low Frequency radio waves, between 3 and 30 kHz can penetrate seawater.

I'll leave you to explore.

I'm Onno VK6FLAB

Updated 6/4/2024

On or around May 12, 2024, ARRL was the victim of a sophisticated network attack by a malicious international cyber group. ARRL immediately involved the FBI and engaged with third party experts to investigate.

This serious incident was extensive and categorized by the FBI as “unique,” compromising network devices, servers, cloud-based systems, and PCs.

ARRL management quickly established an incident response team. This has led to an extensive effort to contain and remediate the networks, restore servers, and staff are beginning the testing of applications and interfaces to ensure proper operation.

Thank you for your patience and understanding as our staff continue to work through this with an outstanding team of experts to restore full functionality to our systems and services.

We will continue to update members as advised and to the extent we are able.

You may have seen them calling "CQ LCT" on FT8, but its a multi mode event hosted by clubs along the historical Lewis and Clark Trail.

Today I want to talk about something that might feel only tangentially related to our hobby, but it likely affects you.

Recently the ARRL announced that it was "in the process of responding to a serious incident involving access to our network and headquarters-based systems". A day later it sought to assure the community that the "ARRL does not store credit card information" and they "do not collect social security numbers" and went on to say that their "member database only contains publicly available information". Five days after that it's "continuing to address a serious incident involving access to our network and systems" and that "Several services, such as Logbook of The World(R) and the ARRL Learning Center, are affected.", but "LoTW data is secure". Over a third of the latest announcement, more than a week ago, was to assure the community that the July QST magazine is on track but might be delayed for print subscribers.

Regardless of how this situation evolves, it's unwelcome news and much wider reaching than the ARRL.

LoTW, or Logbook of The World, is used globally by the amateur community to verify contacts between stations. The IARU, the International Amateur Radio Union, is headquartered at the ARRL office.

I've been told that I should have empathy and consider that the ARRL is only a small organisation that may not have the best of the best in technology staff due to budget constraints and finally, that LoTW being down for a few days is not going to kill anyone.

All those things might well be true and mistakes can and do happen.

The ARRL has been in existence for well over a century, bills itself as the answer to "When All Else Fails" and has even registered this as a trademark, but hasn't actually said anything useful about an incident that appears to have occurred on the 14th of May, now over two weeks ago. By the way, that date is based on the UptimeRobot service showing less than 100% up-time on that day, the ARRL hasn't told us when this all occurred, it didn't even acknowledge that anything was wrong until two days later.

This raises plenty of uncomfortable questions.

What information did you share with the ARRL when you activated your LoTW account? For me it was over a decade ago. I jumped through the hoops required and managed to create a certificate. What information I shared at the time I have no idea about. As I've said before, I do know that security was more extreme than required by my bank, even today, and the level of identification required was in my opinion disproportionate to the information being processed by the service, lists of amateur stations contacting each-other.

Something to take into account, on the 30th of October 2013, Norm W3IZ wrote in an email to me: "Data is never removed from LoTW." - I have no idea how much or which specific information that refers to.

If you used the ARRL Learning Center, what information did you share? If you're a member of the ARRL, or you purchased something from their online store, what data was required and stored? Is the data at the IARU affected? What infrastructure, other than the office, do they share?

While I've been talking about the ARRL, this same issue exists with all the other amateur services you use. QRZ.com, eQSL.cc, eham.net, clublog.org, your local regulator, your amateur club, your social media accounts, all of it.

What information have you shared?

Do you have an internet birthday, address and middle name?

Recently I received a meme. It shows two individuals talking about life, the universe and everything. They discuss their favourite books, the first movie they ever watched, the name of their pets, what car they learnt to drive in, their interests and other things you talk about when you meet someone new and interesting. The last image of the meme shows the heading: "Security Questions Answered, Welcome Amanda."

So, my question is this: What's your favourite colour and your mother's maiden name?

Seriously, next time you access a service online, have a look at what data that service has. When you sign up, consider the requirements for the service and how much information that's worth. Do you really need to send your birthday, your gender and your physical address with a copy of your passport or another government approved identity document? If you're being asked for the name of your first pet, consider answering something unique. In my case, I generate a random string of characters to use as an answer for each security question.

The ARRL "incident" is the tip of the iceberg. This problem is't going away, it's only going to get bigger and happen more often.

Final observation. With the potential of a global shopping list for thieves coming out of the database at the ARRL, will you be sharing your station address next time and if you're subject to the GDPR, the General Data Protection Regulation, perhaps it's time to ask your online service providers just exactly what they're doing to protect your information, and that includes the ARRL.

I have sent two emails to the ARRL in relation to these questions, but have yet to receive an acknowledgement, let alone answers.

By the time this reaches you, perhaps the ARRL has answers to my questions and more.

I'm Onno VK6FLAB

Anyone got any interesting DIY mag loop plans they can share? Or delta loop.

I’d like to try something new and I don’t want to buy one.

This appeared on Facebook regarding the IT situation over at the ARRL:

This was reported by Chris NW6V

Mike Ritz, W7VO, ARRL 2nd Vice President, was at the WVDXC club meeting last night, having just attended an ARRL board meeting to discuss the outage. Mike reported those meetings are a weekly event until the matter is resolved.

Everything that was running on INTERNAL servers is down until further notice. That includes their VoIP phone system, their .org email addresses, and front ends for things like LOTW. Everything running on external servers - cloud servers etc. - including LOTW data, is believed unaffected. But, such data will not be available until the internal matters are resolved. Thus, "[email protected]" doesn't work - because that was on their internal mail server. But "[email protected]" does - because the relays didn't run internally. I checked, and [email protected].

Efforts to restore the internal systems is proceeding full-time. No time-line can be given. The nature of the problem cannot be discussed.

I believe Mike said - with air asterisks around his words - "We have been advised to say nothing." He responded similarly when asked if "the Feds" were investigating this.

READ MORE: https://w2lj.blogspot.com/2024/05/interesting-speculation.html

Updated 5/29/2024

This update includes information about the status of several services as we continue to respond to a serious incident involving access to our network and systems.

The ARRL Volunteer Examiner Coordinator (ARRL VEC) has resumed the processing of Amateur Radio License applications with the FCC. A more comprehensive update on the status of ARRL VEC services is available here.

There has been no interruption to visitor operating at W1AW, the Hiram Percy Maxim Memorial Station. The station resumed voice bulletins on Thursday, May 23. All other scheduled transmissions, including Morse code practice, and code and digital bulletins, will resume on Thursday, May 30. Please refer to the regular operating schedule at www.arrl.org/w1aw-operating-schedule.

After last week's distribution of the ARRL Letter, our e-newsletter service has resumed. Current editions of ARRL Club News and The ARES® Letter have also been distributed.

ARRL Store orders have resumed shipping. Orders are being fulfilled from earliest order dates to the latest. Please allow additional time for our processing.

There has been no disruption to the @arrl.net email forwarding service, though forwarding email addresses and aliases cannot be modified at this time.

Our telephone system is unavailable at this time.

We appreciate your patience as we continue working on restoring access to affected systems and services.

cross-posted from: https://lemmy.zip/post/16261310

American Radio Relay League Confirms Cyberattack Disrupted Operations

It's hard to imagine today, but there was a time when there was no such thing as either the 80m or the 20m amateur band, let alone 2m or 70cm.

Picture this. It's the roaring 20's, the 1920's that is. Among a Jazz Age burst of economic prosperity, modern technology, such as automobiles, moving pictures, social and cultural dynamism, the peak of Art Deco, we're also in the middle of a radio boom where the world is going crazy buying radios as fast as they can be constructed, there are hundreds of licensed broadcasters, the bands are getting crowded, radio amateurs have been banned from the lucrative radio spectrum above 200 meters, and can only play in the "useless short waves" using frequencies greater than 1,500 kHz. And play they did.

On the 2nd May 1925 amateurs proved they could communicate with any part of the world at any time of the day or night when Ernest J. Simmonds G2OD and Charles Maclurcan A2CM made a daylight contact between Meadowlea, Gerrards Cross, Buckinghamshire, England, and Strathfield, Sydney, New South Wales, Australia on what we now call the 20m band. This contact occurred not once, but regularly, for several days, using 100 Watts.

To give you a sense of just how big news of this feat was, on the second scheduled contact the Prime Minister of Australia, Stanley Bruce, sent a message to England's Prime Minister, Stanley Baldwin: "On occasion of this achievement Australia sends greetings."

If you recall, the IARU, the International Amateur Radio Union, was a fortnight old at this point. Less than a year later contact was made using voice.

Between the banning of radio amateurs from frequencies below 1,500 kHz at the London International Radiotelegraph Conference in 1912 and the Washington International Radiotelegraph Conference in 1927 the world had irrevocably changed. In 1912 the discussion was almost all about ship to shore communication. By 1927, the world had tube transmitters, amplitude voice modulation, higher frequencies and what the 1993 IARU President, Richard Baldwin, W1RU calls, "literally an explosion in the use of the radio-frequency spectrum".

In 1927 individual countries were beginning to control the use of spectrum, but there was no universal coordination, no international radio regulation and as we all know, radio waves don't stop at the border.

Richard W1RU, writing in 1993 says: "In retrospect, the Washington conference of 1927 was a remarkable effort. It created the framework of international radio regulation that exists even today. It had to recognize and provide for a multitude of radio services, including the Amateur Service. It was at this conference that amateur radio was for the first time internationally recognized and defined. Bands of harmonically related frequencies were allocated to the various radio services, including the Amateur Service."

While the IARU was two years old, it really hadn't represented amateur radio on the international stage, until now.

The 1927 conference defined an "amateur" as a "duly authorised person interested in radio electric practice with a purely personal aim and without pecuniary interest."

The harmonically related frequencies that were allocated to the Amateur Service are recognisable today. I'll use current band names to give you some context.

1,715 kHz to 2 MHz, or 160m, 3.5 to 4 MHz, or 80m, 7 to 7.3 MHz or 40m, 14 to 14.4 MHz or 20m, 28 to 30 MHz or 10m, and 56 to 60 MHz or 6m.

Of those, the 20m and 80m bands were exclusive to amateurs. The 10m and 6m bands were shared with experimenters and the 160m and 80m bands were shared with fixed and mobile services. You'll notice the absence of bands we use today, the 2m and 70cm bands, 15m and the so-called WARC bands to name a few.

The final ratified document goes into great detail about the requirements, the restrictions, how to deal with interference, how to allocate frequencies and numerous other provisions, many of which will look familiar, almost a hundred years later, if you've ever looked at the rules and regulations under which you operate as a licensed amateur today.

There were various radio amateurs at the 1927 conference, but as Richard W1RU puts it: "much of the credit for the success of amateur radio at that conference has to go to two representatives of ARRL -- Hiram Percy Maxim, president of ARRL; and Kenneth B. Warner, Secretary and General Manager of ARRL."

While Richard points to their roles in the ARRL, you might recall that Hiram was elected international president of the IARU and Kenneth its international secretary-treasurer.

Whichever way you look at it, whichever organisation you credit, today we have amateur bands thanks to those efforts made nearly a century ago.

I'm Onno VK6FLAB

cross-posted from: https://infosec.pub/post/12513834

American Radio Relay League cyberattack takes Logbook of the World offline

The American Radio Relay League (ARRL) warns it suffered a cyberattack, which disrupted its IT systems and online operations, including email and the Logbook of the World. [...]

Over the years you've heard me utter the phrase: "Get on air and make some noise!". It's not an idle thought. The intent behind it is to start, to do something, anything, and find yourself a place within the hobby of amateur radio and the community surrounding it.

Since starting my weekly contribution to this community, thirteen years ago, almost to the day, I promise, this wasn't planned, you'll see why in a moment, I've been working my way through the things that take my fancy, things that are of interest to me, and hopefully you. From time-to-time I don't know where the next words are going to come from. Today they came to me five minutes ago when a good friend, Colin, VK6ETE, asked me what inspires me, after I revealed to him that I didn't know what I was going to talk about.

That's all it took to get me rolling.

There are times when getting to that point takes weeks, I do research, figure out how something works, explore how it might have been tackled before, if at all, and only then I might start putting my thoughts together, often I'll have multiple stabs at it and if I'm lucky, sometimes, something emerges that I'm astonished by. Today is much simpler than all that, since the only research required is to remember the people I've interacted with.

Last week I met an amateur, Jess M7WOM, who was in town. Until last week, we'd never met and interacted only online. We discovered that we have a great many things in common. A joy for curiosity, exploration, technology, computers and a shared belief that we can figure out how to make things work. That interaction, over the course of a day, continues to fuel my imagination and provides encouragement to try new things.

The same is true for a friend, Eric VK6BJW, who asked what they should do with the hobby after having been away for a long time with family, children, commitments and work. Just asking a few simple questions got the juices going and provided inspiration to start playing again.

Another amateur was bored and claimed to have run out of things to do. A few of us started asking questions about their exposure to the hobby. Had they tried a digital mode, had they built an antenna, had they tried to activate a park, or as I have said in the past, any of the other 1,000 hobbies that are embedded within the umbrella that we call amateur radio.

Right now I'm in the midst of working through, actually truth be told, I'm starting, Okay, actually, I've yet to start, reading the online book published at PySDR.org. Prompted by a discussion with Jess last week, I started exploring a known gap in my knowledge. I likened it to having a lamp-post in front of my face, I can see to either side, but in-between is this post, obscuring an essential piece of knowledge, how one side is connected to the other. In my case, on one side, I can see the antenna, how it connects to an ADC, or an Analogue to Digital Converter. On the other, I can also see how you have a series of bytes coming into your program that you can compare against what you're looking for, but the two are not quite connected, obscured by that .. post. I know there's a Fourier Transform in there, but I don't yet grok how it's connected.

Recently I discussed using an RDS, or Radio Data Systems decoder, called 'redsea', connected to 'rtl_fm', in turn connected to an RTL-SDR dongle, that is, you connect an antenna to a cheap Digital TV decoder, tune to an FM broadcast station and use some software to decode a digital signal. It turns out that the PySDR book serendipitously uses this signal path as an end-to-end tutorial, complete with all the code and example files to make this happen. I actually read the chapter, but it's assuming some knowledge that I don't yet have, so I'm going to start on page one .. again.

So, what has this got to do with Inspiration, you ask. Well, everything and nothing. Inspiration doesn't occur in a vacuum. It needs input. You cannot see light without it hitting something, radio waves don't exist and cannot be detected until it hits an antenna, the same is true for inspiration. It needs to hit something. You need to react, it needs to connect.

That is why I keep telling you to get on air and make some noise.

I'm Onno VK6FLAB