this post was submitted on 30 Jun 2024
26 points (100.0% liked)
diy
21833 readers
1 users here now
Finally, a comm for that one user who hand-makes longbows. This ones for you, comrade.
founded 3 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Have you tried AliExpress? Seems like the sort of thing they should have. You may have to buy a big pack or search for individual screws but it should surely be cheaper than $100
I tried looking for them, and it turns out that they are the same brand being sold in Amazon India. The issue with these screw packs is that some of the smaller and mid-ranged screws are not available. Like for example, M2x2mm and M2.5x2.5mm.
Working in a machine shop, there are many times where I can't find a screw which is short enough. A quick trip to the belt sander usually solves this. If you can't find a M2x2 screw, you can settle for an M2x5, M2x10, etc. screw and grind it down to size for a "perfect" replacement.
These screws are all Metric. The nomenclature (M#-#x# - e.g. M8-1.0x20) is pretty straightforward. The number after the M is the diameter (in mm), the number after the dash is usually omitted, but denotes the distance between threads (pitch, in mm) if the screw deviates from the standard value, and the number after the X is the length of the threaded part (omitting the head / cap, in mm). As long as the diameter and pitch are the same, the screw length can be shortened to create a substitute.
You probably still want to buy the correct screws, but if you have access to a belt sander or a bench grinder or something (or even a vice and a dremel), it is an option.
Excellent post. Just wanted to add that a nut or two on the screw you’re trying to sand down can help you hold it while you’re working.