3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
My buddy has a cold plunge and this filter started cracking. After looking at it you can tell it's definitely 3d printed (and well)
On the left you can see my first attempt. I just cut rectangular holes in CAD and it's pretty close but not pretty. Printed in PETG on a K1 Max
Is there a way to do this in the slicer instead? I played around with 0 walls and different infill types but that didn't work out
~~Tangent: That sounds like a bad idea for food safety. And I'm referring to both the original and the recreation. If it were for myself, I would buy something made of metal.~~ edit: Thought it was a coffee thing, disregard.
On topic: Could you clean up the holes with a hot needle and some patience? PETG tends to be very stringy, which is probably the reason the holes are not well defined. Maybe try tuning your printer to minimise stringing?
agree to disagree