this post was submitted on 05 Aug 2023
1156 points (95.8% liked)

Memes

45731 readers
1101 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
 
top 50 comments
sorted by: hot top controversial new old
[–] [email protected] 118 points 1 year ago (6 children)

Inaccurate meme - the white and red RCAs in composite typically don't actually carry the left and right channels - usually, the white one is L+R, meaning both the left and right channels combined into one, and the red one is L-R, the difference between the right and left channels.

This is done so that a mono television, which will only have a yellow and white port, will still be able to hear both audio channels, as opposed to having to completely miss out on one of them

[–] [email protected] 23 points 1 year ago

Wow, Til I guess. Never ever thought that this is what actually it is for.

[–] [email protected] 15 points 1 year ago (1 children)

That makes so much sense! I never understood it, and it became irrelevant before I worked it out.

[–] [email protected] 3 points 1 year ago

It's so funny, I had the same reaction! Never quite understood it, just switched plugs until it worked. Then it got phased out and... decades later a meme brings light to my confusing childhood!

[–] [email protected] 7 points 1 year ago (1 children)

Do you have a source for this? AFAICT this is untrue. Mono audio using just the white connector exists, but this depends on configuration and does not make the red connector a difference signal.

[–] [email protected] 6 points 1 year ago

I swear that I've seen it mentioned somewhere, but you are entirely right that I can't find a source. Maybe it was some weird device I used a long time ago? Regardless, sorry for not doing my research before posting

[–] [email protected] 4 points 1 year ago

Oh, they did the same with stereo radio.

[–] [email protected] 3 points 1 year ago (2 children)

This must be BS or a regional thing. All the RCA ports I've seen in North America are labeled L and R, not L+R and L-R.

[–] [email protected] 2 points 1 year ago (1 children)

It's possible that it might only be a thing in PAL regions - I'd try, but I don't have anything that uses composite to try now.

[–] [email protected] 2 points 1 year ago

I can confirm that everything that uses component and L/R that I have used in my life (born in 2001 in the Netherlands, so PAL) has separate L and R channels. I have confirmed this with my multimeter before.

load more comments (1 replies)
[–] [email protected] 2 points 1 year ago

I appreciate you starting this comment with 'Inaccurate meme'. I think it should become a thing. Really helps me know to buckle in for something good

[–] [email protected] 31 points 1 year ago (3 children)

Pretty sure Van Gogh wasn't deaf in that ear though.

[–] [email protected] 12 points 1 year ago

Things probably sounded weird there though. Lots of whooshing.

[–] [email protected] 7 points 1 year ago (3 children)

His GF could whisper in his ear all the way from across town.

load more comments (3 replies)
[–] [email protected] 2 points 1 year ago

I think y'all are nitpicking this joke too hard

[–] [email protected] 25 points 1 year ago

gamerz like me:

Red, Blue and Green Component cables

[–] [email protected] 24 points 1 year ago (1 children)

laughs in european

I present to you: the Scart.

Our gaming consoles came with it.

We were clueless the first time we hooked up our N64 at gran-gran, since the old TV did not have a Scart connector, but we figured out that the Scart’s colored cables go in there.

[–] [email protected] 9 points 1 year ago (1 children)

Scart was amazing. RGB, composite, component, audio. All in one cable. Granted that cable and connector were enormous, but one cable nonetheless.

[–] [email protected] 12 points 1 year ago (1 children)

SCART was terrible.

Theoretically it had all that in one cable, in practice it never did. You’d usually have 3-4 SCART ports on a TV, but not all ports accepted our output the same signals. There was no way to tell from the outside what the output or input from a SCART port so you either had to try different port combinations or look it up in the manual (if you had one). Most TV’s had one port that accepted s-video, on that accepted RGB and they usually accepted composite on all ports.

Worse, not all cables had all 21 connections. If you were lucky you could tell because not all pins on the connector would be there (but this wasn’t necessary the case).

Usually there was also one port on a TV that output the video from the tuner. This was used for analog pay TV decoders. You would hook it up to that SCART port and it would get the scrambled video from the TV and return the descrambled video over the same port.

Also, due to the size and design of the connector it was almost impossible to insert it blindly. Inserting one into the back of one of those enormous CRT television was always a challenge.

load more comments (1 replies)
[–] [email protected] 23 points 1 year ago

This is actually a pretty helpful diagram for when I inevitably forget which color does what

[–] [email protected] 19 points 1 year ago (1 children)

Not even the SCART kids get it.

[–] [email protected] 2 points 1 year ago (3 children)
[–] [email protected] 22 points 1 year ago (1 children)

Ahh SCART, the beafiest connector. Feels like you're plugging/unplugging a nuclear power plant.

[–] [email protected] 2 points 1 year ago

I see your SCART, and I raise you one Monsters Inc. Scream Extractor power plug.

[–] [email protected] 8 points 1 year ago (1 children)
[–] [email protected] 6 points 1 year ago

Americans and their NTSC!

[–] [email protected] 19 points 1 year ago* (last edited 1 year ago) (2 children)

VGA was so much better.

The composite video output commonly seen on 1980s microcomputers couldn't display high-resolution text without severe distortion making the text unreadable. This could be seen on the IBM PCjr, for example, where the digital RGB display it came with could display 80×25 text mode just fine, but if you connected a composite video display (i.e. a TV) instead, 80×25 text was a blurry, illegible mess. The digital video output was severely limited in color depth, however; it could display only a fixed palette of 16 colors, whereas the distortion in the composite video could be used to create many more colors, albeit at very low resolution.

Then along came the VGA video signal format. This was a bit of a peculiarity: analog RGB video. Unlike digital RGB of the time, it was not limited in color depth, and could represent an image with 24-bit color, no problem. Unlike composite video, it had separate signal lines for each primary color, so any color within the gamut was equally representable, and it had enough bandwidth on each of those lines to cleanly transmit a 640×480 image at 60Hz with pretty much perfect fidelity.

However, someone at IBM was apparently a bit of a perfectionist, as a VGA cable is capable of carrying an image of up to 2048×1536 resolution at 85Hz, or at lower resolutions, refresh rates of 100Hz or more, all with 24-bit color depth—far beyond what the original VGA graphics chips and associated IBM 85xx-series displays could handle.

Also, the VGA cable system bundled every signal line into a single cable and connector, so no more figuring out which cable plugs in where, and it being so future-proof meant that, for pretty much the entire '90s, you could buy any old computer display and plug it into any old computer and it would just work.

Pretty impressive for an analog video signal/cable/connector designed in 1987.

load more comments (2 replies)
[–] [email protected] 15 points 1 year ago
[–] [email protected] 13 points 1 year ago (4 children)

This is RCA. Wasn’t composite early HD with RBG-RW?

[–] [email protected] 10 points 1 year ago (1 children)

You're thinking of component. The two are (or were) frequently mixed up.

[–] [email protected] 4 points 1 year ago (1 children)

Yep, you’re right! Ah the memories.

[–] [email protected] 6 points 1 year ago (1 children)

A good way to remember is that RGB on the same wire is a Composite signal whereas when they have their own cables they are sent as individual Components.

[–] [email protected] 2 points 1 year ago

Composite is Red, White(Sometimes black) and Yellow.

The best way to remember is Composite rhymes with shit.

load more comments (3 replies)
[–] [email protected] 7 points 1 year ago (1 children)

Channel 03 gang represent!

[–] [email protected] 3 points 1 year ago (1 children)

Screw channel 3, channel 4 is where it's at.

[–] [email protected] 3 points 1 year ago

Oh, it's on. I bet you had a Sega. Pfft

[–] [email protected] 4 points 1 year ago

Panel 4: Hellen Keller / Empty Square

[–] [email protected] 2 points 1 year ago
[–] [email protected] 1 points 1 year ago* (last edited 1 year ago)

you are not so old and you should feel badly for making the mid range elders feel even that one more step closer to death.

load more comments
view more: next ›