Cool Guides
Rules for Posting Guides on Our Community
1. Defining a Guide Guides are comprehensive reference materials, how-tos, or comparison tables. A guide must be well-organized both in content and layout. Information should be easily accessible without unnecessary navigation. Guides can include flowcharts, step-by-step instructions, or visual references that compare different elements side by side.
2. Infographic Guidelines Infographics are permitted if they are educational and informative. They should aim to convey complex information visually and clearly. However, infographics that primarily serve as visual essays without structured guidance will be subject to removal.
3. Grey Area Moderators may use discretion when deciding to remove posts. If in doubt, message us or use downvotes for content you find inappropriate.
4. Source Attribution If you know the original source of a guide, share it in the comments to credit the creators.
5. Diverse Content To keep our community engaging, avoid saturating the feed with similar topics. Excessive posts on a single topic may be moderated to maintain diversity.
6. Verify in Comments Always check the comments for additional insights or corrections. Moderators rely on community expertise for accuracy.
Community Guidelines
-
Direct Image Links Only Only direct links to .png, .jpg, and .jpeg image formats are permitted.
-
Educational Infographics Only Infographics must aim to educate and inform with structured content. Purely narrative or non-informative infographics may be removed.
-
Serious Guides Only Nonserious or comedy-based guides will be removed.
-
No Harmful Content Guides promoting dangerous or harmful activities/materials will be removed. This includes content intended to cause harm to others.
By following these rules, we can maintain a diverse and informative community. If you have any questions or concerns, feel free to reach out to the moderators. Thank you for contributing responsibly!
view the rest of the comments
Eh, the fusing on the plug is a dealbreaker for me, especially with that load potential
Other features are present in AU (three pin safety, switched outlets, etc)
The fuse offers per device protection, as well as per room/area.
E.g. you have a lamp that draws 1A. It's cable is rated for 3A. It has a malfunction and starts drawing 10A. This won't pop a breaker, but will overload the cable. Eventually it could catch fire from overheating. If it has a 3A slow blow fuse, it will kill the fuse before it kills the cable.
It also helps to isolate problems rapidly to 1 device.
yeah but the only reason it happened was because you use ring mains.
aint' nothing going to convince me that shit belongs in the 21st century.
The ring main was the impetus for it. However it allows for safe down rating at the plug. My lamps don't need 13A flex. If the only safety system is a 13A breaker, then you're stuck with it, or risking a cable overload
What? You’re against a fuse in the plug? So you’d rather the circuit breaker cuts off everything if one thing fails?
Edit: After searching online it’s not even a debate. The UK has the best plugs.
Germany and Australia also have highly regarded plugs but still ranked 2 and 3 respectively.
We have fuses are only a requirement for our ring main system though, most countries dont use that.
True.
What happens when a device fails in a non Type G plug country? Does the whole house go off, a portion of it, or just that device?
As I understand it, just a portion. So where we tend to have breakers for something like, downstairs sockets, upstairs sockets, downstairs lights, upstairs lights, cooker etc. they would have it broken down far more granularly so maybe a single room or even multiple breakers for a single room and limited to much lower currents. Like our breakers are for 32 amps generally, theirs might be 16 or lower.
Thank you for answering my curiosity.
I still don’t see how that would be better than fused plugs where only the device will go off, even if it was more granular I wouldn’t want the whole room to cut off just because one thing failed. I’m not an electrician so obviously don’t know the intricacies of it all, just every time I’ve seen plugs discussed ours are top.
Ok. What happens if you pull 15amp load on a 10a circuit?
Edit sksksk you really didn't like that question, huh?
It would blow the fuse and likely trip the circuit breaker as they’re rated for 10amps.
in my house? shuts the overloaded circuit down. Because every damned one has an RCD with an overcurrent detector
The fuse is part of why it's the safest.