We need to start to fill up lemmy :) Can you solve this issue?
My HEVO (Hypercube Evolution), now 5 years old started to have very weird banding.
It has a Bowden BMG Extruder and a E3D V6 printhead with CHT-Nozzle. MKS Robin with TMC2209 and Klipper.
Benchy is ABS, lower one is HIPS. Printed at 230°/105° bed. part cooling fan off.
I took apart and cleaned the extruder. The gears look intact and i can move the extruder by hand without binding. I found the E3D V6 was loose. I retightened it, which didn't solve the issue.
I'll spend a beer to the one that solves this issue ;)
Edit: Found the Issue: hotend not hot enough.
Heyouu :) Nice! Showcase your printer? Here's mine.
Yeah my filament is stored in dryboxes and I janked the carriage around, it's fairly stable, no unusual flex :(.
I'm going to make my newly built DuelingZero ready for printing tonight then I can finally fix my HEVO :) I plan on Upgrading to the Hextrudort, which will hopefully fix my issues. Upgrade path ist step by step to a complete hevORT :) let's see how that goes.
I présent to you
I use this carriage and the rail x gantry from the same designer.