this post was submitted on 25 Jun 2023
2 points (100.0% liked)

ErgoMechKeyboards

5766 readers
12 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

founded 1 year ago
MODERATORS
 

Hi all,

I have an idea in my head, but I’m a cable short, and looking for suggestions.

24-key split-ortho (2 keys per finger, where you press both top and bottom keys simultaneously to get the home row key), with per-key RGB and OLED display on the left side. But…

I’d like to run this off a single BlackPill controller on the left hand side, and use a CAT6 cable to bridge the two sides.

CAT6 has 4 twisted pairs, so 8 cables. If I run a 4x3 matrix then that’s 7 cables. Plus another for the VCC for the RGB. But then no more for the DIN/DOUT for RGB. GND should be fine as I can earth the right hand side separately, but I’m missing a cable if I want RGB.

Are there any suggestions on how I might be able to get around my challenge?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 1 points 1 year ago* (last edited 1 year ago) (1 children)

HDMI cables, with 19pins (I will use it in my next build), or flat cables, which you can find in different sizes and pin counts (I used some with 10 pins in my Rommana). Both types of connector and cables can be easily found in Aliexpress.

[–] [email protected] 1 points 1 year ago

Thank you. It was specifically the CAT6 I was Looking to use, as you can get an ultra thin patch cable, and it will clip in (so reduced risk of shorting the controller). Maybe I need to go without RGB? 😭