Nice job. Grow tents are perfect for 3d printing, and you can grow weed in them too 😀
3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)
Moderation policy: Light, mostly invisible
Isn't it a problem to put the resin and the curing machine that close?
I have wondered about it myself, but it hasn’t caused any problems in the 6 months I’ve been printing. The curing station cover is supposed to block 99.95% of UV rays according to Elegoo’s website.
And having to go through the curing station cover and the printer's cover means that even less gets through. Basically 0.05% of 0.05%, so effectively zero.
So no worries on that front.
At work we have multiple printers set up side by side with their respective curing station. No problems so far
Also curious about this, don't know the answer. I've been keeping mine right next to each other simply due to a lack of room. No ill effects yet though, and I've cured and printed things at the same time before
I'm considering becoming new to the hobby in the next month or two.
What are your...uh...specs? Would they suit a beginner?
This is definitely a beginner setup if you’ve got the funds for it. I got lucky and received the printer, wash, and cure machines as Christmas gifts, so I only had to buy the ancillary stuff.
Some people make due with just the resin printer, since you can manually wash and cure prints. Depending on the ventilation in your space, you may not need the grow tent either. Having the whole shebang is really convenient, though.
It’s an Elegoo Mars 3 Pro resin printer, Elegoo Mercury bundle for the wash and cure machines. The tent was just a plant grow tent turned sideways that I measured to fit. There is a vent fan to pull the fumes and ducting that runs outside through a window vent adapter. On top of that, I use gloves, eye protection, and a 3m respirator, which I’d say are the things that should definitely not be compromised on. I’ve seen some gnarly posts about people that skipped out on safety gear.
Then it’s just a matter of setting it up and figuring out the initial settings. There’s smaller QoL things you can buy, like better tools than the ones that come with it or a flex plate. It’s a lot to set up initially, but once it gets going it’s worth it. I realized I didn’t have any needle blights for my DnD session this weekend so I printed a bunch out over night. A quick coat of primer and some dry brushing and they’ll be ready to play with.
Before you take the plunge, do some research and consider what you will be printing for most often.
This is an overgeneralization but there are two main types of printing methods-- vat polymerization and material extrusion.
The set up pictured in this post is VP. It uses light and mirrors to cure resin layer by layer. I think the main advantage to this method is fine detail and less post production polish. The main disadvantage is, unless you have a lot of money, you have a smaller printing space. Excellent method for artistic works such as miniatures.
The other way is basically pushing a plastic wire through a hot nozzle layer by layer. The main advantage is that it's faster, cheaper, and offers more printing space at entry level prices. The disadvantage is that the lines will be quite apparent and will require more post processing work for a clean look. Really good for rapid prototyping and functional prints.
Although it is a helpful skill to have, you don't need to know how to make 3d models. There's a ton of free models for just about anything you can think of.
What liquid in the bath?
99% alcohol. It’s probably the main reason for the vent and wearing a mask, since the resin fumes themselves don’t spread very far depending on how long I have the lid off.
Good to know, I've tried different liquids, but the alcohol always works best I find.
Cool! Now print with it!
All jokes aside, your station is insanely clean, looks like it hasn't been used. Either that or you just are very careful. All my hoods are stained and the wash vat is a mess, lol.
Oh I took this picture back when I first set it up. It looks much more used now.
What liquid in the bath?