ErgoMechKeyboards

5855 readers

2 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 1 year ago

MODERATORS

[email protected]

Built half a keyboard (first prototype for my custom design) (lemmy.world)

submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]

5 comments fedilink hide all child comments

This is the right half of my first custom design. Not available yet as its still in prototyping phase.

Features:

Fully wireless, running ZMK
Case with fixed tenting angle (not shown in the picture as I am currently designing it)
- Provides space for large battery
- Bottom-facing MCU, here a Seeed Studio Xiao
Reduced pinky keys
extra keys below middle finger column and next to inner column
thumb keys aligned with grid (for me, this was the most comfortable position anyways, your mileage may vary)

Basically a 42 (-2) keyboard: One pinky key less and the 6th column has been moved to more ergonomic positions (no pinky stretching or hand bending outwards)

Pic shows the right half with MBK Legends keycaps along some custom keycaps made with FKCaps' custom keycaps generator. I am using a slightly modified Colemak-DH layout where I Q and Z to the left and all punctuation to layers so the left pinky only has to operate a homerow key (and caps word / num lock).

top 5 comments

sorted by: hot top controversial new old

[–] rooq 1 points 1 year ago (1 children)

Looks great 👍 How did you decide on the stagger? Did you measure your hand or did you play with different positions on a piece of paper?

[–] [email protected] 2 points 1 year ago

Dipping the fingers in dyed water and laying them on a piece of paper, measuring, printing and checking on the printed sheet.

It appears to me now that this method does not acknowledge how well your fingers are able to find their home row key while typing, or that the optimal stagger might be different for different tenting angles. Would strongly recommend to 3D print / laser cut the PCB design first and trying it out with actual switches beforehand.

I will do this for the next iteration before designing the case, and also look at some popular keyboards with a more aggressive stagger for hints. Will definitely reduce the middle finger column stagger as it is way too aggressive right now.

For some columns I slightly deviated from measurements deliberately, e.g. the inner column should be slightly lower than the index column, but it's a minor difference.

[–] [email protected] 0 points 1 year ago (1 children)

QAKJH9

(I couldn't find the possibility to rotate 1.5u keycaps by 90 degrees)

[–] [email protected] 0 points 1 year ago (1 children)

Looks like you might have wanted to reply to this thread

[–] [email protected] 1 points 1 year ago

thank you - and sorry (and I'm not the only one 🤔)