TheDuckPrince

joined 1 year ago
MODERATOR OF
hentaigatcha
sorted by: new top controversial old
Microsoft begins cracking down on people dodging Windows 11's system requirements in c/[email protected]
[–] [email protected] 2 points 4 days ago (1 children)

Damn if it was ok i would install windows 7 now...for real

Can you help me to understand Frame Gen and Upscaling? in c/[email protected]
[–] [email protected] 1 points 3 weeks ago

over twice it is a little overkill

That's my concern, I don't understand why on 6600XT I can't limit frame, from my test even FRTC can't be enabled :(

Can you help me to understand Frame Gen and Upscaling? in c/[email protected]
[–] [email protected] 4 points 3 weeks ago

This answer is so so superberb, thank you so much for clarify me this, also with the list of terminology. I didn't know that FSR3 is an upscaler + semi frame gen... It's a pity that BG3 doesn't support this...

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 1 points 3 weeks ago

As I said to someone, pixel 7 is affordable for me, but I'm afraid of the overheat, the G2 seems really terrible soc

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 1 points 3 weeks ago (1 children)

I'm really afraid of this, I've seen a video of a pixel 7 pro that stop a videocall on telegram for the overheating issue. I just can stand this, because I sometimes travel and I want to take picture and long long videos...

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 2 points 3 weeks ago (1 children)

Obtainium

Didn't know about obtenium. I think pixel 8 seems the only good choice also if it's pricey and I'm afraid that is a lot smaller than the s22+ that I think is a right size

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 3 points 4 weeks ago

Ya it’s not a good look of things to come, but so far it’s not a huge issue (yet).

Not a huge deal now, but...I don't like this move...I don't like it AT ALL...

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 3 points 4 weeks ago (2 children)

I can tell you that there are channel marked as NSFW that share video and gif and if I send it to my gf, on her phone (even with nsfw enabled) she get the message "this channel is used to share pornographic material" while on android I can see everything.

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 1 points 4 weeks ago

good answer thank you, the problem is that if I have to sideload every week it could be an issue for me. My concern is about youtube, because I watch so much vanced, reddit (that I still read but I'm writing here when I can), and the freedom to see nsfw. I love to try games and on the high seas I can find a lot of apk but I don't know if its the same on iOS.

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 2 points 4 weeks ago

OMG I was a Sony user long time ago, Xperia X was so so beautiful!

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 2 points 4 weeks ago (2 children)

Actually I love to testing modded app, rooting, changing roms, with samsung and oneplus I lost this because install a custom rom brings a lot of issue with banks, camera (damn camera2 api) and so on almost all modern phone is not convenient to go to a custom rom

I used to love Android but I want to move, and I don't know if it's the right thing. in c/[email protected]
[–] [email protected] 3 points 4 weeks ago

THIS ^

Thank you so much, I didn't think about Firefox, I'm a firefox user on every system I have, and I rely a lot on extensions. And I have my little server with sonarr, radarr, jellyfin and syncthing that is not so much, but it works and I had fun making it, I don't want to lose the joy of do what I want with my phone.

16
Can you help me to understand Frame Gen and Upscaling? (lemm.ee)
submitted 4 weeks ago* (last edited 4 weeks ago) by [email protected] to c/[email protected]
5 comments fedilink
 

Hello everyone, I have a 6600XT and I am just recently approaching these technologies. Everything I read on the web and on yt seems to contradict itself.

This is what I understand:

  • FSR (and Super res): it's upscaling and you can use it to make a game smoother (so technically I could go from 30 to 60 fps)?
  • AFMF is a frame generator so technically it's a win-more-condition, if I have 60 fps I can do better, but it doesn't improve something that isn't already fluid.

That said beyond the fact that FSR 2 (on Baldur's Gate 3 for example) makes everything a bit grainy and blurry compared to native resolution, I did this test:

BG3 on an ultrawide screen at 2100x900 high details, native runs me at 43 fps.

FSR2 (quality) + AFMF: I get 190fps

But 190fps goes beyond the 75Hz of my Freesync monitor. And the frame cap in game seems to turn off. Radeon Chill cannot be enabled, so is there a workaround? Other than using custom drivers like R.ID, which seem to be stuck at the March release?

But it really makes sense for soft pacing single player to have all that FPS without a frame cap? Do I understand well the case-scenario where I should use one or the other tech?

Thanks

99
I used to love Android but I want to move, and I don't know if it's the right thing. (lemm.ee)
 

I was an iOS supporter until iphone 5 then I discovered the beauty and freedom of Android.

To this day with Samsung s22+

But currently I am a bit tired, there is no android phone that I am passionate about, oneplus has given me nothing but problems, Samsung with exynos is a disaster (not to mention the new blockages at sideload and the green stripes on the display), I don't even want to go near all the other Chinese brands, and Nothing is not what it promised to be.

I want to go back to iOS but there are a few things holding me back:

  • how can sideload be managed on iOS? Are there modified apps like youtube, reddit?

  • I follow a lot of NSFW channels on telegram, discord and reddit itself, are there any problems on iOS? are there ways around this? (my girlfriend has iOS, and every time I want to forward an nsfw gif she doesn't see it)

  • surf the sea, is it complex on ios? Especially in terms of gaming?

TBH only yt, nsfw and modded apk keep me on android. Thanks a lot in advance

5
I've installed picofly and followed retry guide but something is not yet clear. (lemm.ee)
 

Hi, I've installed a picofly (hwfly clone) on my mariko, and followed the rentry guide. But I have some questions and I don't find this answer anywhere:

  • Why on Mariko I don't have the possibility to boot on OFW? It seems that rentry guide add the code for stock nand only for Erista.
  • Can I update emuNand (file) to lastest fw? I'm on 15.0.0 now
  • is there a show like tinfoil?
  • I see different file type for game like xci and nsp what is the difference? Should I have to use app like goldleaf?

Thank you so much

-1
I have an account on kraken but what should I do now? (lemm.ee)
 

Hi guys sorry for the noob thread I hope this will not trigger someone.

I want to start to invest in crypto just a little every month. But I don't want to trade a lot and I want medium risk maximum.

For one that want to start and study. Do you think to start first buying btc and eth in percentage? And only after a certain amount start to move on medium risk coin?

Another question: is there some YouTuber or blog that talk about crypto without any stupid fake news and promises to get rich?

Thanks a lot

11
do you think it's worth to update an old CR-10s? (lemm.ee)
 

Hi! I have an old CR10-s, I don't have money to buy a new, and more performant printer, so I just used and spare OrangePi PC that I had to use klipper, and I love it! It was so satisfying. Now I want to change the fan inside the awful control box but then? I read about stepper dumper are useful? I want to install a BLtouch, TL smoother and a ADXL345 for input shaping. but do you think it's worth? I also tried to find info about new and more silent stepper driver, but for what I understood I can't install them on my stock board, is that correct? I should move to a Bigtreetech?

All of this will cost me like maybe 60$ + maybe sth if I want to put a noctua on the extruder and a magnetic plate...

To sum up: does this planned updates worth? do I need to move to a new board for the stepper driver? it's better to throw away the printer? (I'm joking). I want to achieve a more reliable print, lower noise and a little more speed.

(see the anycubic viper is so damn fast)

Thank you a lot in advance

75
Is anyone concer about denuvo on switch? (lemm.ee)
 

This morning I read the article about Denuvo on Switch. What do fellow pirates think of this? Could it pave the way for that crap on other consoles as well? Is it time to become a datahearer? (⌐■_■)

view more: next ›