I'm trying to move away from cron jobs, not that they don't work, but I want to get on with the times and also learn some things.

I created two user timers (and the associated services), one for backing up my data and the second to upload to B2. I'm using two scripts I had in my cron jobs for a few years and they worked without problems. But with systemd timers both scripts fail with exit code 15 (process terminated) and I have no idea why.

I run Debian 12 Bookworm.

Here's the output for the status of the upload service:

> systemctl --user status rclone-up.service
○ rclone-up.service - Run rclone up for b2
     Loaded: loaded (/home/clmbmb/.config/systemd/user/rclone-up.service; disabled; preset: enabled)
     Active: inactive (dead)
TriggeredBy: ● rclone-up.timer

Apr 11 06:10:39 tesla systemd[1698218]: Starting rclone-up.service - Run rclone up for b2...
Apr 11 06:12:18 tesla systemd[1698218]: rclone-up.service: Main process exited, code=killed, status=15/TERM
Apr 11 06:12:18 tesla systemd[1698218]: rclone-up.service: Failed with result 'signal'.
Apr 11 06:12:18 tesla systemd[1698218]: Stopped rclone-up.service - Run rclone up for b2.
Apr 11 06:12:18 tesla systemd[1698218]: rclone-up.service: Consumed 12.811s CPU time.

Also, here's the log created by rclone while running:

2024/04/11 06:10:42 INFO  : integrity.2376: Copied (new)
2024/04/11 06:10:43 INFO  : hints.2376: Copied (new)
2024/04/11 06:10:43 INFO  : nonce: Copied (replaced existing)
2024/04/11 06:10:47 INFO  : config: Updated modification time in destination
2024/04/11 06:10:55 INFO  : index.2376: Copied (new)
2024/04/11 06:11:40 INFO  :
Transferred:      443.104 MiB / 2.361 GiB, 18%, 16.475 MiB/s, ETA 1m59s
Checks:              1503 / 1503, 100%
Transferred:            4 / 19, 21%
Elapsed time:       1m0.8s
Transferring:
 *                                   data/2/2328: 19% /502.259Mi, 2.904Mi/s, 2m19s
 *                                   data/2/2329: 52% /500.732Mi, 10.758Mi/s, 22s
 *                                   data/2/2330: 14% /501.598Mi, 3.150Mi/s, 2m15s
 *                                   data/2/2331:  0% /500.090Mi, 0/s, -

2024/04/11 06:12:18 INFO  : Signal received: terminated

Where should I look to get some more information about what's going on? Why would the service be terminated like that?

LE:

Setting TimeoutSec=infinity inside the [Service] section of the unit file seems to help. Not 100% if it's a good idea, but I'll experiment with it.

So, at the moment I'm using Nginx Proxy Manager, but lately I started seeing it moving slower and slower and even though I tried traefik some time ago, I didn't manage to make it work.

Anyway, I want to start using traefik again, but I want to use it like this:

• I want to access all my services/containers in my LAN through http (port 80) on something like sub.mylan.home
• I want to access some of my services over the internet through https (port 443) on sub.mydomain.com

I know this is possible, but I don't get the hang of the configuration. Somone care to share some tips?

I've used wireguard for a pretty long time on my server and the phone as a client. I've had the same configuration for at least 4-5 years and never had issues. Last week I moved to using pihole in a container with a macvlan interface, so it has a different IP address than my physical server. Then I went and changed the DNS server IP on the wireguard config on the phone. When I reconnected I see I can't connect to any local IP address like I used to and I can't figure out why.

The local LAN is 10.11.12.0/24, the VPN is on 10.11.13.0/24.

Here's the server wireguard config:

[Interface]
Address = 10.11.13.1
ListenPort = 11194
PrivateKey = ...

PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o enp3s0 -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o enp3s0 -j MASQUERADE

[Peer]
# Galaxy S20+
PublicKey = U59JZqVbk2eFxTb7tteyu0WHlMTZsk68E7CF7v2AX2U=
AllowedIPs = 10.11.13.5/32

[Peer]
# narwhal - T480 job
PublicKey = Ja9OL13IoZA17GJq0/LbwizB9s2dRQLHHgW2C4TcFyY=
AllowedIPs = 10.11.13.7/32

And here's the phone's wireguard config:

Address = 10.11.13.5/24
DNS = 10.11.12.55
PrivateKey = ....

[Peer]
AllowedIPs = 10.11.0.0/16
Endpoint = my_dyndns_hostname:11194
PublicKey = 6aF1cJhH9oeQWr9LYOpH3wk+lN4k9/tSiAqV6LkUQ1Y=

I am able to connect and can ping 10.11.12.77, the IP address of the server, but nothing else. I have two RPis running as mpd servers and I used to be able to connect to them too, but not anymore. Their IP addresses are 10.11.12.105 and .106.

Also, before the dns change I was able (of course!) to use the local DNS I set up on the pihole, but now I'm not able to connect to the new DNS (.55) so I can't get any local address to resolve.

I'm looking for some hints on what I'm doing wrong. Please help.

Going to my account I can see all the comments I've made, but not the posts, even though there's the posts count showing the correct value.

Intel graphic drivers collect Telemetry By default in windows.