monty33

joined 11 months ago
[–] [email protected] 4 points 7 hours ago

agreed! being able to unlock the phone while im pulling it out of my pocket was great. But the one place that fails is a phone sitting on a surface. i say give me two sensors! One one on the back and one under screen

[–] [email protected] 1 points 1 week ago

I have had these permission issues in the past. Once I switched to mounting directly in the LXC they all went away.

[–] [email protected] 4 points 2 weeks ago

One other difference is that findroid cannot transcode.

 

Well I totally borked my ZigBee network, and it looks like I'll need to factory reset and re-pair everything. I ignored the warning, and attempted a channel change. Lost everything and can't get any device to connect.

So since I need to do this, what is everyone's preference of ZHA vs Z2M? I was on ZHA, but am I missing anything on the other side?

[–] [email protected] 6 points 4 months ago (1 children)

I like using a specific finger. Guess which one wed all pick 😂

[–] [email protected] 3 points 4 months ago (22 children)

Sounds like potentially a DNS issue

[–] [email protected] 3 points 5 months ago (1 children)

I have templates for various regular meetings that I attend. In these templates I have a property called "attendees". In each template I pre-populate that with names of folks who are regular attendees. Then I can edit it to catch the attendees on that specific day. This helps me when I search for a person's name it pops up with the meetings they attended.

[–] [email protected] 4 points 5 months ago (2 children)

Is that user correct? I get an error when I click on it.

[–] [email protected] 3 points 5 months ago (1 children)

Have you considered a travel router? I have a Gli.net travel router, and that can connect to an existing WiFi network and then you can create your own lan behind that. You can even configure it to use a VPN service if your concerned about your traffic on the existing WiFi.

 

Hello all,

I currently have my primary NAS running TrueNAS Scale, and I am adding a second as an off-site backup of my critical data which will also run TrueNAS Scale. I have three datastores at the moment, nextcloud, backups, and media. I want to replicate the entirety of nextcloud and backups, but for media I only want to backup my irreplaceable media. This would be personal photos and videos, but not my collection of Linux isos.

Is it possible to have a ZFS Replication task that excludes certain directories? If not, how would you recommend I approach this?

Thanks!

[–] [email protected] 1 points 6 months ago

If you're referring to Chromecast with Google tv, than there is absolutely an app! Give it another shot!

[–] [email protected] 1 points 6 months ago (1 children)

What is the best way to check max read/write speed? Here is the output from lspci. Do you see anything strange?

00:00.0 Host bridge: Intel Corporation Device 4e24 00:02.0 VGA compatible controller: Intel Corporation JasperLake [UHD Graphics] (rev 01) 00:04.0 Signal processing controller: Intel Corporation Dynamic Tuning service 00:14.0 USB controller: Intel Corporation Device 4ded (rev 01) 00:14.2 RAM memory: Intel Corporation Device 4def (rev 01) 00:15.0 Serial bus controller: Intel Corporation Serial IO I2C Host Controller (rev 01) 00:15.2 Serial bus controller: Intel Corporation Device 4dea (rev 01) 00:16.0 Communication controller: Intel Corporation Management Engine Interface (rev 01) 00:17.0 SATA controller: Intel Corporation Device 4dd3 (rev 01) 00:19.0 Serial bus controller: Intel Corporation Device 4dc5 (rev 01) 00:19.1 Serial bus controller: Intel Corporation Device 4dc6 (rev 01) 00:1c.0 PCI bridge: Intel Corporation Device 4db8 (rev 01) 00:1c.1 PCI bridge: Intel Corporation Device 4db9 (rev 01) 00:1c.2 PCI bridge: Intel Corporation Device 4dba (rev 01) 00:1c.4 PCI bridge: Intel Corporation Device 4dbc (rev 01) 00:1c.5 PCI bridge: Intel Corporation Device 4dbd (rev 01) 00:1c.6 PCI bridge: Intel Corporation Device 4dbe (rev 01) 00:1c.7 PCI bridge: Intel Corporation Device 4dbf (rev 01) 00:1e.0 Communication controller: Intel Corporation Device 4da8 (rev 01) 00:1e.3 Serial bus controller: Intel Corporation Device 4dab (rev 01) 00:1f.0 ISA bridge: Intel Corporation Device 4d87 (rev 01) 00:1f.3 Audio device: Intel Corporation Jasper Lake HD Audio (rev 01) 00:1f.4 SMBus: Intel Corporation Jasper Lake SMBus (rev 01) 00:1f.5 Serial bus controller: Intel Corporation Jasper Lake SPI Controller (rev 01) 01:00.0 Non-Volatile memory controller: Silicon Motion, Inc. SM2263EN/SM2263XT SSD Controller (rev 03) 02:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller 03:00.0 Non-Volatile memory controller: Silicon Motion, Inc. SM2263EN/SM2263XT SSD Controller (rev 03) 04:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 05:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 06:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 07:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04)

[–] [email protected] 2 points 6 months ago (1 children)

I struggle to find a motherboard and separate CPU that gives me better value that this. Neither of these are perfect but I think that offer plenty for my use as a NAS.

 

Hi all,

I am looking at building my next NAS. My current will move to offsite, and the new will be primary. I previously used this motherboard, and was planning to go with that again. Then I saw this one, which seems like a better option. It has a slightly better CPU and a PCIe slot, but can only have 32GB memory max compared with 64GB max on my current.

Am I missing anything or is this a no-brainer to switch to the N100 board?

 
 

I'm a bit stuck at the moment and hoping I can get some guidance. Right now I store my media and other files on a few external drives connected to one of my Proxmox nodes, and passed through to an OMV VM. I backup everything important off-site.

I'd like to separate my storage from my Proxmox nodes into a dedicated NAS and dip my toes into ZFS and also Proxmox high availability. I also want to roll open source software (probably TrueNAS) on the NAS, but I do not want to build an entire PC. The off-the-sheld Synologys and the like seem like overpriced hardware especially if I'd prefer an alternative software.

I am considering getting one of the used business PCs or other mini-pc and connecting a USB-C DAS up to it and installing TrueNAS on the mini-pc.

Is this a viable approach? Am I setting myself up for a system that I'll want to upgrade in a couple years?

Here is an article that describes a similar approach: https://www.androidauthority.com/cheap-diy-nas-server-3348392/

 

I've got a brand new Pixel 8 and my battery isn't making it through the day. Android tells me Firefox is eating it up in the background. I just changed it to restricted battery use and I'll see if that helps.

I do not want to switch to Brave or Chrome, but this is intolerable. What are you favorite Firefox alternatives and why? Mull? Librewolf?

view more: next ›