[-] [email protected] 3 points 7 hours ago

For bonus points, you'll have to re-explain some of those things randomly to publish updates, which they now require about every 2 years or less or your game just disappears.

[-] [email protected] 6 points 6 days ago

People have been trying to make Blender have some basic CAD functionality, but it's just not there yet.

I admit I haven't tried https://www.cadsketcher.com/ with it yet, though.

[-] [email protected] 4 points 1 week ago

There are things that you shouldn't do or say to minors that aren't illegal, but anyone reading them would still know it's it's unethical/wrong/immoral/whatever. They clearly thought he crossed that line, enough that they'd rather fire him and take a chance on losing the court case for damages for breaking the contract. And then they lost that court case.

It clearly wasn't just "a chat with a minor". The rumors I've heard is that he was attempting to make plans to meet up with them at a convention. That would definitely be in the "big no no" category for a celebrity talking to a minor, even if nothing untoward was suggested in that conversation.

[-] [email protected] 42 points 1 week ago

Because what he did wasn't illegal. It was just wrong. They didn't want anything to do with him any more, but he didn't break the law and so they couldn't use that part of the contract to terminate it.

They felt it was so wrong that they paid him $20mil to break that contract. They absolutely would have taken another option if it was viable.

[-] [email protected] 5 points 1 week ago

Despite it being in the FAQ, all it actually says is that they try to cause as little performance loss as they could. No idea how much that is, or if people will turn it off to get a few frames back.

It does say that without a GPU the performance is considerable.

[-] [email protected] 0 points 1 week ago

I say to one of their neighbors, “their pies tasted better when they were using real sugar, but they’re scared the kids’ mommies will be mad because their kids are up all night so they just took the sugar out. Didn’t even replace it with anything. The Johnson’s still use real sugar, they don’t care.”

Actually, I would say that unless it impacts you negatively, you shouldn't criticize what others are giving freely. If they ask for criticism, that's fine. But you shouldn't volunteer it.

That "free pie stand" didn't do you wrong. You dumped a heap of negativity on them for something they did out of the goodness of their heart, spending their time, energy and hand-earned money on. And you were negative about it, staining their memory of that event for your own selfish desires.

If they had asked you, "why don't you want this pie?" you could have answered, nicely. But they didn't ask you.

Instead, you should have just left and gone to the Johnston's pie stand instead.

[-] [email protected] 2 points 1 week ago

I 100% agree with your point about security and private information, but you are way over qualified for this "job". ;)

It's kind of weird to ask someone to have all that mod experience and then expect them to just post their private information publicly, though. Surely if they have enough experience they'll already know what a bad idea it is to publicly post people's information, and it'll be hard to get them to apply.

It reminds me of a past job recognizing that I have a lot of cashier experience, but then not being able to understand why I refuse to share a till with anyone else. Duh, because I've been through that pain before and any smart office will want to avoid it, too.

[-] [email protected] 8 points 3 weeks ago

IMO, you didn't get unlucky with the K1M or lucky with the P1S. That's the normal state of printers. Most printers are hard to dial in well, and the Bambu printers work like a dream out of the box. Luck is involved for anyone that didn't start in those states.

[-] [email protected] 8 points 3 weeks ago

It gives out free Steam items that you can sell to other suckers. Sometimes it gives a valuable one. It isn't a game, it's a money-maker.

[-] [email protected] 11 points 1 month ago

You can never get to "fully 3d printed" unless you can print metal, and even then the tolerances just aren't there yet.

But if you want a 3d printer that's as 3d printed as it can get, why not look at things that were designed for it, like Rook or Mulbot or The 100?

[-] [email protected] 7 points 1 month ago

A torrent link won't either? In either situation, the site needs to seed their own data, at a minimum.

[-] [email protected] 26 points 1 month ago

And "100 developers working on it" doesn't mean much when they're unpaid and there's no lower limit on how much they have to actually contribute.

11
submitted 3 months ago by [email protected] to c/[email protected]

On the bottom of my prints, there's an area of underextrusion and I can't figure out what's causing it.

I first noticed it when I switched back to a textured PEI bed while trying to print ASA. It's on 20x20mm squares, and it's on the test print for setting up pressure advance... But only on the left-most object.

It's the same even if I add 2 lines of skirt or not. (In addition to my KAMP Voron purge.)

It happens everywhere on the bed that I've tested. It happens to PLA, but it harder to see. For ASA, it's very obvious. For PLA, it's almost as smooth as the rest of the surface, but it's there if you know what you're looking for.

I've only been printing PLA for quite a while now, so I don't know when this started.

I've got an LDO Voron 2.4 with Tap, KAMP, Revo hot end. I've calibrated pressure advanced and changed the value, and I've tried different z offsets with the textured bed, which doesn't change it. (But does change how good the rest of the bottom surface looks.)

Anyone got any ideas?

https://imgur.com/a/ggaZDMY

15
submitted 3 months ago by [email protected] to c/[email protected]

On the bottom of my prints, there's an area of underextrusion and I can't figure out what's causing it.

I first noticed it when I switched back to a textured PEI bed while trying to print ASA. It's on 20x20mm squares, and it's on the test print for setting up pressure advance... But only on the left-most object.

It's the same even if I add 2 lines of skirt or not. (In addition to my KAMP Voron purge.)

It happens everywhere on the bed that I've tested. It happens to PLA, but it harder to see. For ASA, it's very obvious. For PLA, it's almost as smooth as the rest of the surface, but it's there if you know what you're looking for.

I've only been printing PLA for quite a while now, so I don't know when this started.

I've got an LDO Voron 2.4 with Tap, KAMP, Revo hot end. I've calibrated pressure advanced and changed the value, and I've tried different z offsets with the textured bed, which doesn't change it. (But does change how good the rest of the bottom surface looks.)

Anyone got any ideas?

https://imgur.com/a/ggaZDMY

view more: next ›

wccrawford

joined 11 months ago