3DPrinting

15680 readers

120 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

[email protected]

Sovol SV06 stringing issue (discuss.tchncs.de)

submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/[email protected]

23 comments fedilink hide all child comments

I would really appreciate it if someone could help me with this. I'm having an issue with my Sovol SV06, which is that I get a lot of stringing. I'm still fairly new to 3D printing, so I have no idea what could cause this and how I could go about fixing this. I already searched for this issue online btw but didn't really find anything helpful.

The only change I made to this printer is that I hooked up a Raspberry Pi 4 to it and installed Klipper and Octoprint. I'm also using PrusaSlicer with the config from here.

Edit: Forgot to mention I was using PLA for this print

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 4 months ago

Recommend all of this and

Dry your filament. This should be the first thing you do, petg is one of the more moisture sensitive filaments in my experience, it's mostly cosmetic but can cause blobbing and it loves to stick to nozzles, I recommend a sock in general to help keep the block clean, baked on petg in setscrews sucks and I've abandoned blocks that are bad enough. You can clean them chemically but you need some nasty stuff, don't recommend.
What's your extrusion multiplier? Found it better to slightly underextrude petg, helps with blobbing and stringing.
Petg can still string even with everything tuned, it's "sticky" for lack of a better term, some whispy stuff can still happen, you can minimise it but acceptable should be your target, by that mean getting it to the point where yoh don't risk print failure, small whisps can be cleaned up with some hot air.