3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
In theory, the V2 can print a little faster, due to the low center of gravity on the first layers.
However, the fixed gantry height on the Trident makes it possible to install a fixed part cooling, a lighter print head and go even faster.
I'm a little bit in favour of the Trident. Mostly due to a simpler construction, I would assume there are fewer things I can mess up.
Both are solid choices, you won't be upset either way, I was 50/50 on both but decided to do the v2 for 350x350 print area. I have an enclosed mk3s that I use as well,
I was putting together a buildtak surface (which I swear by for abs and nylon) for my mk3s and snapped this photo to compare print area size. I still want to do a trident (and maybe convert my mk3s to a switchwire) but I'd build it to match the MK3s wrt bed size and I'd totally consider a bowden extruder.
All that said, it is markedly faster than the mk3s and I'm definitely no where near pushing it to its limits. There's a lot to build but I would call it difficult, racking the gantry and belt tensioning being the parts I spent the longest time on. I limit to 24 mm^3/s even though I could go faster, it still just absolutely flies with something like a 0.8mm nozzle. My only other headsup is that modding it is addicting, I've thrown on titanium backers and a kinematic mount for the bed, have a whole bunch of other ones in the pipe as well.
Magic Phoenix actually sells a trident kit with 350x350 build plate, with 250mm Z-axis build size.
Big thing for me to do a prusa-sized trident would be the ability to share surfaces between it and my mk3s. 350^2 is nice, I don't fill it all that often but it's nice to have the ability to print larger objects.
Agreed. I'm not a V2 owner, but I built a Trident. The V2 is a little overhyped, IMHO.
In the end, it's just a matter of your own personal taste though. If you want a highly aesthetic printer with complex mechanics, go for the V2. If you like to keep it simpler without sacrificing much, go with the Trident.
If you are fine with a smaller device, the V0 may be the right choice. You could reinforce the frame and do a few other mods to achieve insane (yet experimental) print speeds. 1500 mm/s is doable.