We have a standing shower with a strange leak. It was built with a small tiled wall/step that the frame-less glass shower wall panel sits on. I noticed water pooling outside the door after a shower. At first I thought it was the door seal but upon closer inspection it is coming out of the grout. See pics (right where the arrow is pointing). The shower was already in the house when we bought it so I don't know anything about how it was constructed.
How should I proceed trying to fix this leak? Do I need to re-do the grout? Should I just use grout sealer? Any help appreciated.
Update #1: Thanks for the help everyone. Do ya'll have any thoughts on where the water could be entering from? The silicone caulking was recently redone. My thought was that I have a hairline crack along the grout somewhere that is allowing water to wick in and and along to the outside.
Update #2: It's Fixed! Thanks everyone for the suggestions and advice. My working theory was that water was wicking down under the bottom frame and finding its way into the frame attachment holes. This appears to be what was happening. I ended up pulling out all the caulk around the inside of the shower on that side and replaced it with fresh silicone. That seems to have done the trick. Bingo, no more water on the ground!
Do you know where the water is getting in at? I see that it's coming out from the grout. If I understand the situation correctly, all that re-sealing that hole on the outside will do is make it so that the water sits inside the framing. I wouldn't plug up the outlet hole until you've made sure that no more water will get in there.
ETA: As far as sealing it goes, I'd personally just smear a bead of silicone across wherever the water is getting in/out from. Grout can be a bit tricky to patch and blend, in my experience.
Yeah. When I mentioned resealing I meant I'd reseal the water facing portion of the shower with something like this 511 Impregnator Penetrating Sealer. I agree that I don't want to seal up the water outlet.