you can use denatured alcohol as a solvent to strip the shellac later. might be a better option than trying to burn through the shellac
Thanks for the insight, I may need to try that
I've done wood burning stuff a lot and you should burn first, seal after. Even if your finish isn't flammable (and most I know of are), you'd still want to finish again the burned areas anyway, so you may as well save time burning then sealing/staining/etc.
it is definitely still a problem, the "naturalness" of the finish is irrelevant
even burning wood itself releases compounds that can be harmful (hence why we advise against breathing in smoke)
I second the idea from a separate poster that if you want to burn, seal, and add more burns-- just use a solvent to remove the seal before you do the second set of burns. Or burn it all at once before sealing
Yeah that’s a good point. Thanks for the suggestions, I’m going to try and burn it all at once, but may need to add things later, so I’ll see how the solvent goes to burn and reseal.
Shellac is natural, but it needs to be mixed with denatured alcohol to become a wood finish. I don't feel like going down to my shop, but I would imagine commercial shellac in the can, like Zinsser's, could potentially have other chemicals mixed in to help its shelf life or speed up its drying process. But even then, it still uses denatured alcohol, and alcohol and fire aren't a good combo.
You could make your own, which would just be shellac flakes and denatured alcohol, but it'd still be alcohol based. I'd burn first, then apply your finish.
A handmade home for woodworkers and admirers of woodworkers. Our community icon is a box made by @paddythegeek, the winner of our woodworking contest. Congratulations!