One small /boot which is also my EFI system partition.
And a partition for / which covers all the rest of the drive.
Partitioning only limits flexibility. At some time you will regret your choice of partition sizes.
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
One small /boot which is also my EFI system partition.
And a partition for / which covers all the rest of the drive.
Partitioning only limits flexibility. At some time you will regret your choice of partition sizes.
Tbf, you can mitigate this problem by using lvm or btrfs with subvolumes.
I did that years ago and then kept fiddling with the lfs subvolume sizes. I see absolutely no advantages to make things more complicated than needed.
I dan't know if this is still valid but I used to be told to have different partitions for your system, logs and data (home directories) .. and have the swap-partition located in between them. This was to limit the distance the head has to move when reading from your system starts swapping.
But if you use a SSD drive, that is not valid anymore of course :-)
Kr.
Nowadays you don't even need a /boot unless you're doing full disk encryption and I actually recommend keeping /boot on / if you're doing BTRFS root snapshots. Being able to include your kernel images in your snapshots makes rollbacks painlessly easy.
UEFI forum made it a requirement for motherboard constructors (hp, dell, msi...) to make their UEFI implementation to be able to at least read fat(12/16/32) filesystems. That is why you need a fat(12/16/32) partition flagged ESP (efi system partition) for holding your boot files.
So, I dont think you can do that unless you fall back to the old outdated BIOS or you have some *nix filesystem in your uefi implementation which I dont trust.
It really depends on your requirements...
But a few useful points:
About lvm though, experiment with it before jumping in with your daily driver.
Indeed, it's a bit more complex setup, you won't be able to boot without initramfs. But in certain cases (e.g. encryption or partitions spanning multiple devices) it is very useful.
A lot of distros default to booting with an initramfs or initrd by default, anyway. If only because you can set up an encrypted drive at installation time, so may as well have it but not need it rather than the reverse.
1Gb EFI, rest of the disk LUKS with a single BTRFS inside. Use BTRFS subvols to divide things up. Swap as a swap file on BTRFS (be sure to set it as no_cow).
Same, except ZFS instead of BTRFS for me.
And / is tmpfs, /home is tmpfs, /nix, /etc/nixos, /var/log, /home/$username/downloads, /home/$username/documents, and some other directories are ZFS subvolumes bind-mounted at boot. That's only an option for NixOS or Guix though, so don't worry about opt-in state on other distros.
I prefer a very small EFI partition mounted at /boot/efi, that way the kernels and initrds sit at /boot alongside the rest ot the files (though if you also want encryption you need to add your encryption keys to initrd so you don't have to enter the password twice)
Some distributions (e.g. NixOS) store their kernels on the EFI partition, going small will bite you on those. 1GB is a good size. The Windows default of 100MB is only enough to store two kernels.
Edit: This might actually be systemd-boot
specific.
This is true. I used a 1gb boot partition on my Nixos install and every time I update it I need to delete all the old kernels/initrd and sometimes I even delete the one that's currently running.
I use NixOS, and read my comment again. /boot/efi is only for GRUB. /boot is where the actual kernels reside, and it isn't on the EFI partition.
[This comment has been deleted by an automated system]
In many of my laptop setups I've also solidified around similar setup: 200 or 500 mb efi + luks with lvm with root and home volumes. Swap is a file which makes everything easy without having to care about another partition and is automatically encrypted since it stays on root.
Partition formats is always ext4 since there's no need for anything else. Tried btrfs in the past and it had problems, more than it solved, and xfs years ago regularly had problems corrupting files when power went off. I swore on never using any of those 2 again.
i usually have efi boot partition (512mb), / (linux root), /home (i usually make this pretty big) , and swap partition.
Same, except I also keep /var on a separate partition (old FreeBSD habit), as the I/O characteristics of /var are usually very different from rest of /
Same: EFI, then / is small like 50GB, and home is the remaining of disk. My swap is the size of RAM so I could hibernate but in fact never use it really, as my system either sleep or if shutdowned, can boot in a few seconds. You cannot go wrong with the setup from @[email protected].
There was a time when I had (and we needed) complicated partition... one for / really small like a few MB, and basically one for bin, etc, var, use, home, tmp (not a lot of RAM at the time so tmp was on disk, not in ram) etc.
Usually, I do the simplest thing: all the stuff goes on one big ext4 partition. I don't make a separate partition for /home. I'll make a swap partition if I can remember but I've forgotten to do that before and nothing bad happened. The bootloader goes on a fat32 /boot/efi on the same drive as whatever the Linux install is on. This way I can swap around the drive to different pcs if I have to or easily change/upgrade drives without having to reinstall all my stuff.
This strategy works for dual booting Windows also. I'll put the windows install all on its own separate drive so it won't try to erase grub during a disk check or something. That happened one time. Also, by putting Windows and Linux on separate drives you can use the bios to boot between Windows or Linux if you mess up one of the bootloaders.
The two drives thing is an interesting strategy. I might look into implementing that. Thinking of switching to an arch based Linux from debian.
I also use this method and it's worked great for a long time.
Not saying my practice is the best one, but here's what I do:
efibootmgr
.Simple yet complete. Efficient, and extensible - for example, now that everything is a subvolume, I can easily snapshot it, then create backups with rsync off the snapshot, to avoid inconsistent state between backed-up files.
I think you're going to get a wide variety of responses here. It comes down to a lot of factors.
For me personally, I've been shifting everything I have to Btrfs, so I can tell you what I've done recently and why.
A big caveat is that many of my systems have multiple physical drives. This means I'm often setting things up based on the speed and capacity of those disks.
But, I do have one system with a single drive shared for booting, root, and home. It's set up like this:
A FAT32 partition for /boot. 512 MB.
A single Btrfs partition across the rest of the drive.
Btrfs subvolumes: @ mounted at /, @home mounted at /home. @snapshots mounted at /.snapshots.
I could go crazy with other subvols (e.g. for /var/log), but ultimately it is sufficient for me to be able to snapshot / and /home separately.
For some of my other systems, I'll have / and /home on different drives. In that case, each has their own @snapshots with their own mount point. I tend still to throw the EFI boot partition mounted at /boot on the same drive as /.
It's very easy to simply change /etc/fstab as needed and point to another snapshot, effectively rolling back the drive to some former point as necessary.
I've had some wild issues that I can't even begin to explain with btrfs. I landed on using xfs for / partition and btrfs on /home
Fair, I've not had any issues but I'm sure they exist. One or the other is faster based on workload, too, so it's not really that one is objectively better all the time.
Why not BRTFS for the /home partition?
I haven't had swap since I started using 32GB of ram and I've been fine. Might be worthwhile to use LVM for a more adjustable partitioning just in case. I made the mistake of making root 50G and I've been fighting with it for a while.
swap is there so u can hibernate rather than shutdown
Yeah, 32g is barely enough for what I do daily at work, so I have similar amount of ram combined with similar amount of swap file so I can safely hibernate even when the ram is full.
[This comment has been deleted by an automated system]
Depends on your system. Desktop have different requirements than servers.
On both at minimum, I'd keep /home and /var/log separate. Those usually see the most writes, are least controlled, and so long as they're separate partitions they can fill up accidentally and your system should still remain functional. /tmp and /var/tmp should usually be mounted separately, for similar reasons.
/boot usually keep separate because bootloaders don't always understand the every weird filesystem you might use elsewhere. It would also be the one unencrypted partition you need to boot off of.
On a server, /opt and /srv would usually be separate, usually separate volumes for each directory within those as well, depending how you want to isolate each application/data store location. You could just use quotas; but mounting separately would also allow you to specify different flags, i.e. noexec, nosuid for volumes that should only ever contain data.
/var/lib/docker and other stuff in /var/lib I usually like to keep on separate mounts. i.e. put /var/lib/mysql or other databases on a separate faster disk, use a different file system maybe, and again different mount options. In distant past, you'd mount /var/spool on a different filesystem with more inodes than usual.
Highly secure systems usually require /var/log/audit to be separate, and needs to have enough space guaranteed that it won't ever run out of space and lock the system out due to inability to audit log.
Bottom line is its differnet depending on your requiremtns, but splitting unnecessarily is a good way to waste space and nothing else. Separate only if you need it on a different type of device, different mount options, different size guarantees etc, don't do it for no reason.
Regarding /boot, it can be encrypted as long as your bootloader can decrypt it, for example GRUB can decrypt LUKS encrypted partitions (albeit somewhat slowly). And the only partition that really has to be unencrypted is UEFI system partition (ESP), where bootloaders are located.
Use zram instead of a SWAP partititon. Zram compresses and keeps in RAM. It's default on Fedora and a few others iirc.
Can you still hibernate and suspend?
[This comment has been deleted by an automated system]
Depends on environment.
Real hardware separate for a server partitions for: /home, /var, swap, sometimes /usr, sometimes /var/log/audit Depends on deployment requirements, and if a system is expected to run after filling up audit.
Real hardware for a at home desktop: /var, swap, maybe /home, or just one partition for / and one for swap.
Cloud: all one partition, put swap in a file if it is needed. Cloud images are easy to grow if it is just one partition. Cloud-init will handle that automatically with the right packages installed, no configuration needed. Swap partitions are unlikely to be the right size as they vary according to memory and memory varies according to instance/guest sizes. Swap makes auto growing root partition harder (cloud-init custom config injection required). Best practice is to size workload and instances to not need swap whenever possible.