Linux Gaming

The best way to dual boot is to have separate hard drives for Windows and Linux. I'm not aware of some distros bring more windows friendly than others.

Almost all distros can dual boot, so there's little reason to highlight one as being the best for it. Dual booting is a bit messy and risky no matter what you do, so back up your data first and, if you're new to Linux, look up instructions for dual booting Windows 11 and your chosen distro.

Only one I can think of that does anything special with dual boot, off the top of my head, is Q4OS, which offers a way to install it from within Windows using an app. (It also happens to be tailored towards people familiar with Windows XP or 7, so it should be a somewhat smooth transition for a first time Linux user.) I haven't tried this myself, but I imagine it just expedites the usual steps of dual booting: shrink the Windows partition, then install into the resulting free space (or to an unused disk).

If that doesn't sound appealing, just try any distro recommended as "beginner friendly", like Linux Mint. Tutorials should be easy to find.

I'd suggest against dual booting not because it's difficult to setup, but because Windows WILL eventually wipe out your boot manager that Linux would install to boot both OSes. After 1-2 major Win updates, it usually also updates the bootmanager, overwriting your Linux one. So instead, I'd suggest you just buy a PCI nvme card ($12, if your PC doesn't have space for a 2nd one), add an nvme storage ssd ($35) on it, and then disconnect the Windows drive while you're installing Linux. Linux will then install the bootmanager on its own nvme only. Then, you re-connect the Windows drive, and then you can press F12 upon booting (well, it's usually f12 or f10), to tell your UEFI firmware which drive to boot each time (so basically, you'd use your firmware as your bootmanager, per-drive, instead of grub or windows boot manager as per-partition). This way, no one is stepping into the other's territory at any point.

I'd suggest you start with Linux Mint. You can burn a usb drive to test drive it before you do all that, to make sure it works well with your PC. I suggest you use the Edge version of it, that has a newer kernel (so it has a better chance of supporting your PC).

Always dual booted Linux (ubuntu/mint/manjaro/endeavor) and windows (8/10/11) without issues. I think windows published an update (happened only once if I remember correctly) that wiped Linux partitions so yeah, it can happen, but to me that has the same chance of windows breaking itself because of an update (same with Linux). Honestly just take a backup and try whatever distro you like. If you just want to see what Linux is like you can use virtualbox on windows and install it on a virtual machine.

Dual booting is hard to setup the first time so you may want to have another pc with a guide and a forum ready for help. To me the hardest part was how to understand the partitions for swap/home/root/efi etc. but newer Linux installers have a wizard that usually does everything

Things to remember if you decide to dual boot:

• disable secure boot in the bios
• disable fast boot (I think that's the name) or windows will "lock" the disks on hibernate
• keep your distro ISO image on a USB key with Ventoy installed to quickly restore any issue you may encounter. If windows overwrites the boot partition you can easily restore in 5/10 minutes without losing anything so don't be worried about that

Dualbooting is no problem just install windows first then Linux. If you can put them on different physical drives. Even if windows mess up something you can always access it by the boot menu. I have done quatro boot a decade ago without any major hiccups. Want to see what your hardware can do without windows dragging everything down? Try peppermint. But you can dual boot any distro

You should focus less on dual boot and more on beginner-friendliness. If the distro is very good at dual booting (actually never heard of such a thing) but is a catastrophe concerning usability, then it doesn't make sense i guess. Don't install Linux to hate it :-). Just try a user friendly distro like Mint or maybe even Manjaro. ( Sooner or later you will end up using Arch and tell people on the internet, that you're using Arch btw. I'm using Arch btw.)

dualbooting is often messy because windows update can delete things required for linux to boot.
or to be more specific, it deletes grub, the bootloader.
i've heard you can use a different bootloader called refined to prevent this from happening, that might be worth looking into.
as for which distro, it doesn't really matter. the only real differences between distros are the package managers and repositories (servers for application and update downloads) they use by default. if you like frequent updates, you choose one that has frequent updates, if you don't, you don't

Fedora KDE spin is a nice relative beginner friendly distro. But it doesn't really matter which one you use.

The main issue with dual booting is the initial setup and preventing Windows from messing up the Linux boot loader.

You can either install it on the same drive with different partitions and use the Linux boot loader to select the system to boot, or you can install it on a separate drive and use the boot override function of your mainboard to switch. The latter is a bit easier to setup and with no risk of Windows overwriting the Linux bootloader, but not all mainboards allow easy switching.

If you can, I would recommend keeping your operating systems on separate disks, and even disconnecting your windows disk whilst you install your distro of choice.

I personally multi boot win 10, 11 (SW testing purposes) and Fedora Workstation on my primary system, they each live on their own drive.

LMDE or Elementary OS

Someone just told me about ventoy and how it's great for dual booting but I haven't looked it up to see if it's a usb only thing or what.

Also PopOS is pretty cool for a OS to try, it's what I'm about to setup on my dual boot machine since its been recommended for gaming

aren't recommended for dual booting

Because this makes no difference.

Want to be able to find help quickly? Copy power users. They are the most active home users online. They will know the most about their own setup. Use Arch Linux.

Want to learn enough to fix things if they break (or make improvements)? Use the Arch Linux installer.

Use separate storage devices, so you can always optionally use the UEFI boot menu.

Probably the safest, most cost effective approach is to use WSL.