Nyeeeeeeeeeeeeeeeh, what's up, Doc?

This, er, "knife" is nearly unique in that it's one of only two in my collection that I received without actually wanting it. Now there's a fuckin' sterling endorsement. No, wait. The opposite of that. Indictment. Yeah, that was the word I was looking for.

These things are all over the internet, as anyone who is even peripherally interested in either knives or cheap Chinese import crap is undoubtedly aware. And if you draw a Venn diagram of those two things I am as you know standing directly in the center with geometric precision. There's no official brand or model designation for this, of course, but they're thick on the ground under all kinds of word-salad search-robot product titles. I have even occasionally seen punters with the chutzpah to hawk them claiming to be a "Squiddy" product, which they most certainly aren't.

It is fairly easy to wind up with one of these things for free. I suspect the reason being that China cranked out a metric buttload of units, but the "carrot" fad flashed in the pan even faster than Pogs, light up shoelace pucks, fidget spinners, or jelly bands. All the TikTok clips and Shein banners and whatever other social media nonsense have surely categorically failed to generate sufficient hype to make anyone rich selling this dreck, so now whoever-it-is is stuck trying to figure out what the hell to do with a warehouse full of cheaply injection molded plastic bali-carrots.

So, I ordered two other knives I actually did want, and this showed up in the box along with them. Completely unsolicited.

Gee, thanks.

Anyway, this is after a fashion some kind of balisong, so I think I'm obligated to look at it. It exists somewhere on the graph in between a blunt trainer knife and a fidget toy. There are toddler sized versions of these I've seen as well, but not this one. It is every bit of 7" long, closed, which puts it in the same sort of size category as a full sized traditional balisong. But it has no edge, and the "blade," such as it is, is not only plastic and completely rounded over including the point, but also appears to be hollow inside. It should therefore be thoroughly impossible for even the most uncoordinated of wielders to injure themselves or anybody with this, and even if you managed to stab anything hard enough with it to entertain the possibility of dealing damage it would probably just break instead.

Here's the scoop; There's no way around it. It is, even by the metrics of low-end trainer knives, crap. Just absolutely atrocious.

The Bali-Carrot is of course made via a simple injection molding process. It's thus a channel "milled" design, but milled is precisely the wrong word for it. The construction is extremely simple, consisting only of both handles which are single unitary pieces, the blade, and two screws. There are no bushings or washers or anything. And forget about a pocket clip or a latch.

These are pretty clearly just assembled from parts taken straight out of the mold. Nobody spent any time or money on finishing work, and even the injection job is a poor one. Mine has a distinctly recycled-park-bench air about it, particularly in the tail ends of the handles.

It's assembled by way of two commodity machine screws just chunked into the plastic. The holes for them obviously weren't even threaded to begin with; this is just a sheer friction fit obtained by force. I know whoever is assembling these just uses whatever cheap screws are lying around, too, because I've seen many pictures of these online from many shady purveyors, but the screw heads are often visibly different between them.

Mine are round headed screws, but I imagine one of these could show up with anything in there. At least I got a matched pair.

To positively ensure fitment, I imagine, the openings in the handles are significantly wider than the "blade" is thick. Possibly the original intent was meant to include some washers in there which have since been omitted to cut costs, but I can't say. The upshot is that there are huge gaps left between the handles and blade, which results in an enormous amount of play.

I mean, just look at it.

And if you try to mitigate this by cranking the screws down, the tips of the handles bend inwards alarmingly. This is a lost cause, and I've already stopped caring.

All of the above notwithstanding, the Bali-Carrot almost does fulfill its function as a usable flipping toy or trainer. It has the disadvantage of being incredibly light -- just 46.3 grams in total or 1.63 ounces -- due to being just plastic. But I'm not really one to talk on that front, if we're honest. And it does pivot freely, at least, albeit by way of having huge gaps and tolerances everywhere.

But.

The design is nonsensical. One thing every balisong knife in the world definitely does have is either a pair of kicker pins or a tang pin, or "Zen" pins in the handles. That is to say, by hook or by crook they all have some way to prevent blade overtravel so once the handle(s) are swung around to the open position they stop at the 180 degree mark or near to it.

Except this one. There's a mystery hole there, which looks as if maybe at some point in history someone intended a pin to go in there. But there is no matching interface on the handles even if so, and where it winds up is too close to being in between the pivots for it to ever have been useful anyway.

So the end result of all that is this.

Heh. Nyeh heh heh. Bwaha ha... ha. It's garbage.

Yes, this commits the one cardinal sin, the unforgivable apostasy of a balisong, the singular true heresy: The blade can travel past the open position. It's only stopped by ultimately hitting the back edge of the opposite handle on either side, but it makes the whole thing feel distinctly weird and in my opinion, balisong fixated knife snob that I am, wholly unsuitable for actual practice use. At least if you're ultimately planning to use it to build skills and then graduate to a real balisong knife.

I want to make it clear here that I'm already not going into it with high expectations. Certainly not for a piece of Chinese drop shipped junk that's probably worth less than the packaging it arrives in. But this particular design shortcoming makes the Bali-Carrot feel uncannily wrong on the rebounds if you try to employ anything beyond a simple roll of the wrist and gravity to open it. Rather than rebounding normally the entire length of the handles clack against each other, dead flat, and it's like hitting a very small wet sack of potatoes. This could have been solved in about 2 seconds for no additional cost, too, by just molding some endstop humps in the handles, and then a little protrusion on the heel of the blade. All the parts could still be one piece.

But that's not how it is. When all we get is the above, I guess it's silly to expect to be able to ask for anything more.

The Inevitable Conclusion

If this hasn't been driven into the ground already, it's no surprise that whoever is pushing these now has to resort to giving them away. And even if you get it for free it's still kind of a bad deal.

There is, perhaps, some merit to the fidget toy aspect of it if you don't mind the comically awful fit and finish, and you don't mind the berk you'll look if anyone actually sees you waving a plastic umbellifer around. So the carrot hype remains completely nonsensical to me. Is this what the cool kids are actually into, now? I hope not. If so, maybe this is a sign of being old, and of not getting it -- whatever it is.

But on reflection, I think I'm good. I don't need to get it after all.

A few posts ago, when we discussed the TheOne "BM87" balisong, I did not let on that I ordered something else at the same time. There are, well, two of them.

This is the TheOne "BM51," V6. As you would expect, it is a direct clone of the Benchmade Morpho Model 51. Almost. You see, there are some changes. One of which is immediately visible -- I'll address that in just a moment. The other isn't.

The Model 51 is Benchmade's now very discontinued larger version of the Model 32 "Mini Morpho." I don't own a Model 51, but I do own a Model 32 and I have vouchsafed to you previously that it is my favorite knife in the whole wide world. The Model 51 is much the same but longer. If that's what you want, that's what it is. Although if you fancy a Model 51 now you're going to have a tough time of it. The used market is your only option, and you'll be paying continually skyrocketing collector's prices for the privilege.

But you can have one of these today for around $110. Which, granted, isn't exactly chump change, but for what you get it gives the real Model 51 (and 32) a run for its money.

The (the the the) TheOne BM51 is a very high quality piece of kit.

The one thing that's noticeable from a mile away is the redesigned solid titanium scales, as opposed to the originals' carbon fiber ones. I think they're really swank, even if they do make the knife weigh a bit more. One thing people complained about (although not me!) regarding the Model 32 and 51 was the light weight, which in some people's eyes was a little too lightweight. If that's you, then rest assured that the BM51 weighs a more solid 128.6 grams or 4.54 ounces. And again, I don't have the direct Benchmade equivalent to compare to, but contemporary sources put the Model 51 at 3.3 ounces or 93.5 grams. So the difference would indeed be noticeable, I think.

The scales are rebated with channels down their length, and have five round holes each rather than the original's slotted design. The liners are solid titanium as well, just like the original, and they are anodized in a brilliant blue. And also like the original they are jeweled, although the pattern is coarser and less of it shows through. The effect is really striking, though. Side by side with my Model 32, which has the same finish, the depth of the color is quite comparable.

The pivot screws are T8 on the male side, and the female ones are smooth headed "impossible" screws that carry over from the original. The trick to getting knives like these apart, by the way, is to undo the pivot screws with the handles latched together.

It has the dimensions down to a tee as well. It's 5-7/16" long closed, and 9-3/16" when latched open, with a 4-1/8" spear pointed blade, as measured from the forward tips of the handles. The blade is precisely 0.100" thick, and the spine is very pleasantly rounded. It's made of D2, allegedly, with an as-machined satin finish. I can't verify the actual composition of the steel, but given that even inexpensive knives are coming from China with D2 now, I don't have any reason to disbelieve it. Normally when you buy a clone knife the first thing to go out the window is whatever fancy blade steel the original may have used, but in this case the Benchmades were also regular old D2. So the only possible potential bugbear is differences in the heat treating, which I have a strong suspicion are negligible to nonexistent. And unlike the BM87 I wrote about previously, the BM51 is genuinely very sharp right out of the box. If you want to start using it for stuff right away it won't need much if any of a working over.

The BM51 has a Zen pin kickerless rebound design, which I like a lot. But the other feature it has is the fake Benchmade logo pictured here, and that's the one thing about it that really pisses in my corn flakes.

I don't mind buying a knockoff knife knowing that's what it is. The BM51 is a fine knife in an objective mechanical sense, and I really think it should be able to stand on its own as such even if the design elements are all borrowed. That's basically what, say, Ganzo does and it's worked well for them so far. But if there's even a chance anyone out there in the world may get their hands on this and possibly believe it's the real deal, even for a second, that's a bit more objectionable. I have to dock points for this not going the route of the BM87 from before, which at least had the decency to show up without any stolen trademarks on it.

For what it's worth, my example arrived in a plain white box without any markings on it. So at least it's unlikely to fool anybody if it happens to show up on a store shelf somewhere.

Of course, it does have a pocket clip, and it's no surprise that it's exactly the same design as the Model 32 and 51's. The clip is also titanium -- apparently nothing on this knife isn't except the blade and screws -- and is understated without any engraving, anodizing, or any other embellishment of any kind. The ease of draw it provides is supreme, probably owing to the fact that, seemingly unusually for a knife of this caliber these days, it's actually sprung a little loosely from the factory. You could take it off and give it a bit of a bend if you need a more positive grab. And it is also once again unquestionably on the wrong damn side of the knife by default, which seems to be a pathological fascination shared by every balisong maker in the world. At least it is, with some effort, reversible. More on that later.

This could just about stand in for a review of the Benchmade 51 while we're at it, because superficially every single other feature of this knife is the same. It has the same jimped single piece handle spacers, as well as the same kind of button headed latch that is also spring loaded.

(This is in slow-mo, by the way.)

Just give it a squeeze and the latch pops out neatly. It is in my very best Bruce Cambell that I say: Groovy. Zen pins, titanium everywhere, spring latches... All of these are things I like to see in a balisong.

I also like to see nice phosphor bronze pivot washers. I mean, by preference I'd like to see ball bearings, but I'll take what I can get.

However...

The BM51 has one more surprise up its sleeve, in that it actually has bushing pivots. The original Benchmade actually doesn't -- This is the same design as the one used on the aforementioned TheOne BM87, but in this case it's a mechanical improvement over the original design rather than a cheapening.

While we're at it, though, let's have it in bits. The BM51 breaks down into an identical list of components as its inspiration, with the exception of the added pivot bushings.

The bushings are extremely precise, and they're where the BM51's excellent pivot action comes from. They're just longer than the blade heel is thick, so free movement is assured regardless of the pivot screw tension.

It must be said that there is always a small but noticeable amount of vertical play in the pivots, though, because there's always that clearance left over by the bushings that can never, ever be removed no matter how hard you try. Well, short of machining the bushings shorter, I suppose, which would probably be unwise and would also defeat the purpose. If you really want to give it a go, my example did come with a complete extra set of pivot hardware in the box including all four washers, both bushings, and two pairs of pivot screws.

But still, the score the BM51 gets from the old Wiggle Test is actually pretty good, especially taking into consideration that this is not a ball bearing knife and it has long handles, which magnify the visibility of any runout by the time you're looking at the ends. I think the amount of pivot play is on par with my genuine Model 32. That's a glowing endorsement if I've ever made one.

Here you can see the latch spring mechanism faithfully reproduced. The hook on the heel of the latch engages with that tiny pin, there, and the prong on the handle liner flexes out and puts it under tension. The latch also detents in the closed position, and the cam profile on its heel prevents it from being able to swing far enough to hit the blade. This system is really quite clever and obviates the need for a separate spring. The world knows there are enough parts in here already, what with nine screws, four washers, the two bushings, three pins, the threaded Zen pins, four each of scales and liners, the latch... and then the blade.

Oh, and needless to say when I put it all back together I moved the clip over to the right fucking side of the knife. I did that last, so in all of these other photos it's still wrong. You'll just have to put up with that, I suppose.

Incessant comparison with the Benchmade Model 32 and 51 are inevitable, considering that this is aiming to be a cheaper version of the same knife. It's significantly longer than the Model 32, although that doesn't tell us anything because so is the 51. That's the entire point.

This as well as its original are "traditional" full sized knives, whereas the Model 32 is compact and unusually short for this category. Mine is up top in those photos.

For the money, the Benchmade's finish work is obviously superior. The blade polishes on these two knives aren't even on the same planet as each other. The clone is a fine knife, but the Benchmade is visibly finer. That, and the Benchmade will actually come with a warranty. And it was made in America, if that matters to you.

In operation, though, there is no other word for this TheOne incarnation other than fantastic. Everything you want a balisong to do in terms of spin, balance, and rebound it does perfectly. It does have a noticeably increased heft in the hand owing to the titanium rather than carbon fiber scales. Its spins are slower than the Benchmade's, more deliberate and ponderous. It is still lighter than quite a few other brand name knives of similar length, though. It's like half the weight of a Kershaw Lucha or Moonsault, for instance. And to be fair, the lickety-splitness of the Benchmade Morpho duo is down to both of them actually being much lighter than is typical for a balisong. They're not benchmarks; they're outliers.

Ironically, this is noticeably quieter on rebound than my Benchmade. The extra mass in those titanium scales probably has everything to do with that, absorbing the vibrations rather than broadcasting them. Neither knife is exactly loud, but the BM51 is even less so.

The Inevitable Conclusion

TheOne knocked this one out of the park, if you ask me. I always wanted a Model 51 and I've yet to find one A) readily for sale, and B) at a price I'm willing to pay just, ultimately, for the hell of it. So this scratches the same itch while falling within a much more attainable price bracket, and also carrying no collector's value whatsoever so you won't feel too bad actually using it for stuff. It's a very visually striking knife, too. The bare titanium scales give it a certain gravitas, a sense that it is the real deal even though in one critical way it very much isn't.

The fit, finish, and materials on offer here are all damn good -- exemplary, even -- and it raises the question of why in the hell the Chinese can pull of something like this so well but so few of the bespoke designs they come up with are ever worth a damn.

No, I'm not going to turn this into another globalization rant. We could be here for hours discussing why innovation is so unrewarded in China whereas copying off others is so lucrative. But that's the gist of it, really. Make of it what you will.

But I like the TheOne BM51. Well, except for the fake logo on it. And the name, which makes it sound like you have a stutter.

cross-posted from: https://lemmy.world/post/17097936

As usual, since I already wrote a monumental piece on this in the other community, I'm just going to give you guys the short version. The long version is in the cross-post link above.

What it is: A 3D printable Axis lock folding knife, mechanically complete fully functional, with Penguin beak wave opener, one each. The world's finest; the world's only.

We're having great fun with this and other silly objects over on [email protected].

Jooooooin usssssss. You know you want to.

Printables link: Here.

On a post a while back I made a comment about nobody making an Axis or crossbar locking knife with a CQC style pocket hook opener on it.

This is what's known as "making a call-back." It establishes a sense of continuity with the reader, which makes them feel good about remembering something you said earlier and gives them a sense of belonging or membership in the community surrounding the brand you're building. See what I did there?

Yes, okay, I'm beating around the bush. You all read the title and saw the headline picture. You know what time it is.

Noot noot, mothercluckers. This is the Adélie, and it's exactly what I said it was. If you've been wondering why my output has been so slow lately and what the hell I've been working on instead, now you know.

And it's fully 3D printable. Well, except the blade, of course. You can grab the Printable here.

The Adélie employs the same design philosophy as my previous two knives, in that it is a printable design that can be produced as-is, requires no supports, and does not rely on any external hardware. Except, again, the blade.

And if you don't mind my saying so, I think it's also pretty rad.

Our reference example is provided in this boss black-and-white penguin color scheme. Boss, that is, except for the fact that photographing a snow white object on my usual white background void while keeping it acceptably visible actually turned out to be literally impossible. Sometimes I'm just really fuckin' smart, aren't I?

So today you get blue. And you also get to see why I never use any of the various colored background swatches my photography box came with, because they're terrible. I'm not even going to try to edit the backgrounds out of these photos. So much for consistency in building that brand.

At its core, the Adélie has a truly functional Axis lock/crossbar lock mechanism. Of course it requires no external springs; the necessary spring action is provided by a pair of flexible prongs built right into the model.

I also incorporated a lot of tricks and mechanical improvements over my previous models, all of which I learned the hard way, and which I will now be obligated to eventually backport to those designs now that I've finished this one. Eventually. Give me a minute, okay?

Let's start with the screws. The biggest weakness of my last two models was easily the printed screws, which had the unfortunate but unavoidable capability of being able to cleave themselves in two via the sheer mechanical advantage afforded by their threads. It turns out that Archimedes guy was on to something after all. The upshot is, and some of you probably found out, if you put any torque whatsoever on the old screw design after they reached the point of bottoming out, the heads would just ream right off.

The solution to this turned out to be to make screws that just... don't have heads. I don't know why I didn't think of it sooner.

"That clearly would not work," you say. Well, yes, that is unless every single part that the screw goes through is meticulously designed with a single uninterrupted helical thread all the way through the entire assembly.

Let's talk other features.

The Adélie has a fully reversible, deep carry pocket clip.

It also has the aforementioned Emerson/CQC style pocket hook on it for snappy automatic deployment when you draw it, by way of snagging just so on the hem of your pants as it clears the fabric.

You know what? It occurs to me that for all the times I've yammered about the damn Emerson Wave^tm^ CQC pocket hook opening action, I've never displayed how it actually works.

That's how it works. Fast, clean, elegant. But this isn't the Wave^tm^, because even though Emerson's patent on that expired in 2017, its shape and name are still trademarked. So this is the Penguin Opener.

If you feel like it, you can also use the penguin's beak to open the knife manually with your thumb. I was actually going to put a thumb stud through him, but I determined throughout my testing of various designs that it actually wasn't necessary.

And of course Benchmade's Axis lock patent expired in 2016, so along with every other knifemaker in the world I stole that, too. Surely, though, a plastic 3D printed knockoff of the same cannot be opened with the "Axis flick."

Wrong.

The Adélie has a bushing pivot system. That's design improvement #3. The net result of that is that you can cleanly flick it both open and closed, although owing to the blade carrier's very light weight it takes a bit more finesse than with a commercial knife that's made of... you know, metal and stuff.

The CQC-6K comparison is a bit more on the nose today than usual. The Adélie is 6-5/16" long when open, including the protrusion of the clip at the rear. The blade carrier protrudes 2-1/2" from the forward end of the handles, but the exposed portion of the edge is 1-1/8" long. Of course, it takes standard Stanley style utility knife blades which are available in a variety of styles and guises...

...Including these zooty ceramic ones, which with one installed renders the Adélie completely nonmetallic. Make of that what you will.

Fully assembled and with a regular metal blade in it, the reference example weighs just 27.9 grams or 0.98 ounces. Ultralight backpackers, eat your hearts out. Of course, as a non-commercial product you print yourself, the weight will be influenced by what infill percentage you make it and what material or material(s) you print it out of. Maybe some of you have rhodium-infused PLA filament or something to make the blade carrier heavy. I dunno.

It's a bit longer than the Gerber EAB pictured at the bottom, by necessity. The EAB is made of metal, and it does not require any length to be spent on having a tail screw since the body is a unitary machined piece of steel.

I'm including a disassembly pic with the complete bill of materials just because I got it for free, so to speak. Usually I have to disassemble the knife in question to get this photo, but in this case the Adélie comes disassembled to begin with, all in bits already right off of your print bed. Assembly is, of course, required. I'm not going to go into that here -- this screed is going to be quite long enough already -- but it is all detailed on my Printables post.

It's not serious engineering, this, but some design work did go into the Adélie.

On my previous knives, my screw design was deliberately designed to be operable with a penny, rather than real tools, just to be cheeky. That's not really an option here. With the same single narrow diameter down their entire length, the screws I designed don't quite have the surface area on the head to accept the curvature of a penny's edge. So I had to cast around for some other suitably ridiculous yet readily available tool to match up with.

Ultimately I settled on this, which is one of those promotional giveaway screwdrivers. This one is from the Sloan Valve Company in Franklin Park, Illinois and I've had it since at least the 1980's.

I have oodles of these damn things, and so does anyone else who's been around for a couple of decades. They are precisely the sort of goofy thing that's not quite a real enough tool to actually be useful for much of anything else. I suppose you could also use a normal purpose-built quality screwdriver to assemble your Adélie if you felt like it, but... come on.

I will also leave you with some of the prototype builds I produced while messing around with various tweaks to the mechanism and overall profile.

Now all the internet lost media historians can remain forever wistful over what could have been, rather than what we ultimately got. (For instance, I'm particularly partial to the one with the angled tail and offset rear screw, but it didn't play nice with the pocket clip design so that profile wound up in the bin pretty early on.)

Conclusion: If you want to get your hands on your own one of these, you can download the model files from here.

A mention in the comments of that EDC knife recommendation thread from a few days ago reminded me that, yes, of course I have one of these in my collection. And if you think I've written a volume so far about knives, we haven't even gotten into the multi-tools yet. Oh boy, hang on to your tailfeathers.

There is a spectrum for these types of things. At the one end you have knives that might have an extra function or two tacked on -- a glass breaker or bottle opener are the perfunctory and perennial favorites to make a knife "multifunctional" so you can put an extra bullet point on its box. Then at the other are tools that might only just so happen to contain a knife blade. (Or all the way off the far end, multi-tools that manage not to include a knife at all, like the Leatherman PS.) Squarely in the middle of this gradient lies the traditional Swiss Army Knife.

The Select Fire is firmly on the near end of that particular spectrum. It's clearly built around a dedicated pocket knife mechanism at its core. Knife first, tool second. This is opposed to stuff like classic Leatherman tools that are a knife second, tool first.

But in addition to the obligatory cutout on the back of the handle that acts as a bottle opener, it also has a fold-out tail...

...That accepts standard 1/4" hex drive screwdriver tips.

I can get behind this sort of thing. Lots of knives and multi-tools have some manner of screwdriver capability built in, but the way this is done I think is the superior strategy. This is unlike the Swiss Army approach where you get a middling and, frankly, low quality screwdriver point or two that can't be readily replaced or almost as bad, the Leatherman approach that uses proprietary (and expensive) flattened bits. Instead, with the Select Fire you can chunk any old commodity tip in there to either replace a worn out one or adapt your knife to whatever types of more specialized fastener head you might encounter regularly.

You get four screwdriver tips included out of the box: A #1 and a #2 Phillips, a 1/4" slotted, and a 3/16" slotted. On either side of the knife are two bit carriers that flip out from the sides and are spring loaded so they always snap back to be more or less flush with the handle scales.

The bits are just held in with friction which sounds like a recipe for disaster, but you'll note that with the holder in its home position the cutouts in the handles aren't actually long enough to make it possible for a normal length bit to slide out far enough to fall out. The holder has to be swung out to extract the bits, intentionally or otherwise.

I had to prop this one open by way of example (with the plastic cover from the end of a mini HDMI cable, if you're wondering).

And then, of course, you can also just use the bit socket with no bit in it to drive 1/4" hex head screws. You'll find lots of fasteners with combination hex-and-whatever heads are this size, for precisely that reason.

So the possibilities here immediately present themselves. With the included drivers you could probably completely disassemble any typical desktop PC, for instance. Or if you're a knife nerd like us you could swap out two of the bits for a T6 and a T8. Then you could use your knife to take apart your knives. Yo dawg, etc.

The screwdriver bit arm, or whatever you want to call it, detents in either a 90 degree...

...or 180 degree position.

It does so by way of a spring loaded crossbar in the tail of the knife that slots into a trio of notches in the heel of the screwdriver arm. That's visible here:

It detents into the closed position as well, of course, but does not fully lock in any position. So if you're really reefing on something, you'll want to be sure of your Direction of Application of Grunt so it doesn't fold up on you. If it does it should do no harm, but it'll still be annoying. Also, you can't fold the screwdriver arm up with a bit installed in it -- it won't clear the bottle opener.

The nice thing about the pivoting arm design on, this as opposed to the usual perfunctory short fixed socket often found on these types of devices, is of course the length. The extra reach is handy, plus there's the ability to lock the handle at 90 degrees for extra torque when required. You could in the right circumstances even use this to fish down in a blind hole for a screw. At least, provided the hole were big enough to allow for the diameter of the socket. It's about the same size as the tip of a dedicated exchangeable bit screwdriver, though, so that idea's not too far fetched.

According to the terms of various international treaties, all multi-function tools must by law have a set of largely useless ruler markings etched into them somewhere. In this case it's on the front and back surfaces of the screwdriver arm. There are fractional inches on one side and millimeters on the other. It's just about good for estimating the length of a screw, and not much else.

The actual knife part is a competent but ordinary liner locker with a 3-5/16" long drop point blade made of 8Cr13MoV. The blade is 0.114" thick at the spine, matte bead blasted, and has a hollow grind. A subtle belly is present towards the forward end, which you will notice if you look at it carefully. Fully open, the Select Fire is 7-1/2" long, and closed it's about 4-1/4". It's a chunky boy, too, probably mostly owing to having to pack in both the screwdriver arm and the pair of bit carriers in the handles. Mine weighs 147.1 grams or 5.19 ounces. Yours won't -- I'll get to why in a little while. The widest point appears to be just forward of the bit holder socket when it's folded: 1.438" or about 1-7/16". It's also quite thick, 0.655" or about 5/8" not including the clip, and 0.775" with it or 3/4".

Said clip is a pretty typical traditional design and is not deep carry. It is reversible, though, and dual thumb studs are present to ensure that the Select Fire is sufficiently ambidextrous. But the only option for clipped carry is tip down, which always fucks me up whenever I carry this knife because practically everything else I own is a tip up knife instead.

The clip is nicely engraved with the Kershaw logo. It's the real deal, not printed or painted.

The Select Fire is a true liner locking knife, not a frame locker, so you get the full sandwich of left and right liners and a matching scale on either side. The scales are injection molded and I'm pretty sure they're glass filled Nylon. Kershaw doesn't specify what they're made of but that's what they feel like to me.

They do, however, specify that this knife is a Grant & Gavin Hawk design. The G&G Hawk moniker is marked on the blade like so. Apropos of nothing, we have indeed looked at another Hawk design knife previously, and suffice it to say I think this one is a damn sight more useful in the real world. I also notice that the Hawk duo make a custom utility knife as well. Apparently now I have a rival in the world of bird-adjacent box cutter design.

And I'll tell you what, at an MSRP of $50 and a street price of about $35, the Select Fire is a damn sight cheaper than getting your hands on any of the in-house Hawk knives.

For your money you do get a knife made of what is without question a budget steel. 8Cr13MoV is identical in composition to AUS-8 stainless, and is an alloy probably pretty well suited to the use case this knife is likely to endure, i.e. careless use by tradesmen, Joe Six Pack, and other oiks who are not knife collectors. It's a decently tough steel in that it will resist the blade snapping better than many other contemporaneous options, and it is extremely corrosion resistant which is a plus for any owner who will believe "stainless steel" should mean "totally rustproof under all circumstances," even though you and I know it doesn't. Edge retention is 8Cr's weak point, but you can't have both edge retention and toughness at the same time without spending a lot more money on your steel. So, the marketing department will call it "easy to sharpen" instead.

As a budget folder and a liner locking one at that, I do have to point out that the blade in mine doesn't sit quite centered. That's not unusual for this sort of knife, since liner and frame lock mechanisms inherently have a force pushing the blade to one side at all times when they're closed. It's all gravy, though -- even with this, the blade does not actually contact either liner during operation.

The Select Fire is a plain folder and not spring assisted, which is a trifle strange because the bastard is already loaded to the gills with springs anyway. One more probably wouldn't have broken the bank. The pivot action is pretty nice, though, and as is typical for Kershaw knives it locks up positively and solidly with minimal wiggle in the blade in either direction once deployed.

So, about springs.

At first I didn't intend to take the Select Fire apart for this column. I figured there probably wasn't anything in there to see that anyone would care about, so the original plan was to just look at it from the outside, rack up the usual shitload of stacked focus macro photos, maybe make a joke about not being able to use something to take itself apart, and then on to the next thing.

But I did take the Select Fire apart, and I'm glad I did. Because if you're the same kind of idiot I am, there are a couple of design surprises inside you might find interesting. If you aren't, well, you can go away or scroll to the bottom for the wrap-up. The construction details of the Select Fire are likely to appeal to Select People. (You see what I did, there.)

The reason I took it apart is something the eagle eyed among you might have already noticed, which is that the blade pivot uses Nylon washers but the screwdriver arm pivot has phosphor bronze ones. So that's odd, and I wanted to take a closer look.

On the way, I found this. The Select Fire has a complete separate superstructure underneath the scales. At first blush that's not unusual for a liner locking knife. Obviously it has to have liners under the scales, I mean, duh. It's right there in the name. But the Select Fire has a secondary set of screws holding it all together underneath the scales, totally independent of them, and thus could function without the scales mounted at all if you wanted to. You wouldn't want to, but you could. Normally a knife like this has all the screws pass through the scales and the liners all in one go, directly into whatever it uses for spacers.

So with that there are an absurd number of screws in this knife. 19 in total, if you count the ones for the clip. And it is separated by the endstop pin and one diabolo shaped spacer, down there in the tail.

What I didn't expect was to find that the detent bar for the screwdriver is loaded with a tiny Axis style Omega spring. It's just so twee and lovable. I adore it totally. There's one on each side.

To accommodate this, there is a complicated pocket molded into the back side of each scale. I suspect this is why there are no mounting holes for the clip on this end to allow tip up carry; They'd conflict with the spring. So for that reason, I'll excuse it... just this once.

The two spare bit holders swivel on pins that are sandwiched between the scale and the liner. They're sprung with one torsion spring each, which when the knife is fully assembled rests in a slot in the back face of the scale. However, anyone who takes one of these apart will quickly discover that this spring will pop out of place pretty much as soon as the scale screws are removed. How it goes back in is not immediately apparent if you don't understand how the mechanism works.

Upon reassembly, you'll want to slip something in between the spring and scale like a small screwdriver to hold the end of the spring in place and keep it from incessantly flicking itself back out into precisely the position you don't want it to be in. Pinch the scales together and hold them that way until you get the two rearmost screws in.

The Select Fire is about the same overall length as my usual CQC-6K we use for comparison purposes around here. It's broader in the beam, though, possibly with some breadth intentionally added to accommodate the spare bit holders. At over 3" in blade length it is unfortunately too large to carry in some locales. You know which ones fixate pathologically on that particular limit for whatever reason. For prospective owners who are unfortunate enough to live in such hellholes, consider instead the Kershaw Shuffle DIY, which is much the same idea but has a 2-1/2"-ish blade instead. But it also loses the extra length on its screwdriver bit socket.

With such a smorgasbord of moving parts, the Select Fire is probably also a strong contender for the title of King of the Fidget Knives. It's like a toddler's busybox but for strange adults. Not only can you mess with the blade pivot, but both bit holders swing in and out and spring back into position with a satisfying click, and you can diddle with the screwdriver arm as well. Or whirl it around like a helicopter with it in the 90 degree position.

The Inevitable Conclusion

This may not be the knife most people think they want, but it's probably actually the knife most people should have.

We tend to fixate on the knife aspect solely, and fixate on it in a particular way. Well, of course we would, right? This is a knife community, and this is a column about a knife. But overall we tend to hyperfocus on things like the alloy of the steel, the aesthetics of the scales, the cleverness of the mechanism, and the snappiness of the draw. And we make up silly scenarios and use cases to justify all these as if we're likely to need to pull the thing on zombies in a hurry. Or if on a daily basis most of us need to use a pocket knife to split logs. Or maybe use the damn thing as a piton.

But, well, we don't. Come on, be honest.

By and large most of us stupid monkeys don't live our life on the veldt anymore. We live it in a manufactured world. There aren't trees to chop down or tigers to fight off with our knives -- but there are frequently encountered screws. Lots and lots of screws, all over everything, holding our modern jungle together.

What most modern people use the knife part of their knives for, even though they will never ever admit it unless pressed very hard -- possibly in a vise -- is not actually really critical work. It's opening boxes and mail. It's cutting tape and rope. And cleaning fingernails, and coring apples, and chopping the tag of the back of your shirt. And the other perennial favorite, of course, is incorrectly using the tip of the blade as an impromptu screwdriver (and promptly snapping it off). Well, you're already holding the tailor made solution to that in your hands right here.

And all that's just those people who even carry a knife on a daily basis at all, which I am sure is a slim minority in our current century. All of the above is why so many even out of those of us who do have cruised along just fine with nothing more than a regular Swiss Army Knife, which in objective terms is, actually, terrible at the knife part of being a knife.

The Kershaw Select Fire isn't. It is a very decent, very competent knife. It is a knife first, just as I outlined many paragraphs ago. But it also includes a very serviceable screwdriver. One that is actually better at its job than most multi-function tools that are also worse knives in the bargain. There are "better" and fancier knives in the would -- and more expensive ones, sure. But will they do this for you?

Just yesterday while I was doing the photography for this column a thunderstorm blew through and I paused what I was doing to go stand at the back door and watch. It was then that I noticed the downspout by the back door was overflowing. So after the storm passed, I climbed up there to have a look. The downspout elbow was clogged with washed away stray nesting material and shingle grit and maple tree whirlybirds who knows what else, and it was clogged up far enough down that I couldn't reach all of it.

I mean, of course it was.

But I still had the Select Fire in my pocket, so I used it to take the screws out of that chunk of downspout -- a task at which it excelled -- right then and there. Unavoidably, I got muck all over myself in the process. And my knife. So what if I did? This knife has no collector's value to scuff. And I got the thing unclogged and put back together with no other hassle at all.

It is stories just like these, told a million times a day, that make up our collective civilized world. Nobody is actually slaying zombies with their damn knife. Nobody is fighting terrorists with it, either. Very few are in the woods actually doing any "survival." Nobody's skinning game they've just killed with their teeth, or whatever the fuck else the manufacturer of that expensive knife is hoping you're fantasizing about with enough lack of clarity to finish typing in your credit card number.

But there are things to mend. Everywhere, all the time. Just now my Select Fire saved me from a damp and grumbling trudge across the grass to the garage to get a screwdriver. And next? Who knows. But I'll have it and because of that I'll be ready.

For most of us, a knife like this is probably a better daily companion than the several-hundred-dollar, designer steel, carbon fiber scale, titanium liner, individually serial numbered, custom anodized clip, drawer queen of a bauble you just saw on the front page of your favorite knife web site, whatever it was. I've said it before and I'll keep saying it because it'll never not be true: The knife you will use is a better knife than the one you won't, no matter what either one costs.

Postscript

Oooh, a bonus feature.

I mentioned that my Select Fire weighs more than yours will. Okay, not by much. But still. That's because I made a slight modification.

As stated, the screwdriver bits can't actually fall out while the knife is knocking around in your pocket, because the cutout they rest in isn't long enough for them to fully slide out of their holders. But sometimes mine do still come loose, and then I find them still captive but all higgledy-piggledy in there. This annoys me, even if only just for the principle of the thing.

So given that I am already, shall we say, invested in Zack Freedman's Gridfininity system for unrelated purposes, I tend to have a ready supply of 2mm x 6mm neodymium button magnets lying around. 1/4" is 6.35mm. I think you can already see that these are the perfect size to interface with a typical quarter inch screwdriver bit. So I glued one magnet into the bottom of each screwdriver bit slot, and now they stay neatly in place no matter how hard I shake, tap, or tumble the knife around.

Nirvana: Achieved.

I assure you this is not a pen review.

Actually, I'm not entirely sure it's really a knife column, either. You see, this is the Guard Father Spike OTF. And you'd have to be very charitable to call it a "knife." That's because it hasn't got an edge.

It's completely round in cross section and from a couple of feet away looks like it might be the world's most bodacious tire gauge. But peering down the barrel of it you can see that what it does...

...Is this.

It's billed as an automatic ice pick. The potential applications for such an object are, naturally, left as an exercise for the reader's imagination.

At its core is a slightly over quarter inch thick (0.257"), 3-7/16" long stainless steel spike. The whole thing is just about 5-7/8" long retracted, 9-1/4" fully extended, and it rings in at 63.3 grams or 2.23 ounces. And the end of course terminates in a vicious point.

The fire button lives in the track where the pocket clip goes, and you can rotate the clip...

...To cover over the button and act as a rudimentary safety.

You'll probably feel a little more comfortable for that, and also knowing that the button takes a committed mashing to set the thing off. This is a good thing because the Guard Father is a single action out-the-front mechanism, which means it's just raring to go under powerful spring tension at all times. Cry havoc and the dogs of war are slipped in a hurry; when you press the button the spike fires out with extreme alacrity. And it locks in the forward position ready to serve as, just for sake of example, the world's most bodacious leather awl.

But! There is no mechanism for retraction like your standard issue Greaser switchblade. The only means of putting it away again is to hold the button down and manually push that pointy pokey tip back into the barrel. I highly advise not using your fingers for this, not only for the fact that doing so is functionally impossible but also a highly fraught undertaking. Instead, it's best done by pressing the point against a sturdy object but preferably one that's slightly softer than the steel is so you don't mar the point any more than it already comes from the factory.

Presumably because of this aspect, the point actually isn't quite needle sharp but arrives with a small but perceptible flat spot on the very end.

The mechanically initiated among you may have already guessed that if you have to shove the point back in by pressing it against something but still have it lock, it'd be impossible to get it completely enshrouded by the barrel without using a pusher small enough to fit inside. And since that's not how it works, you'd be exactly right. A small amount of the point is always left sticking out.

How much? Precisely 0.064", or 1.64 mm, which translates to, "exactly enough to be mildly dangerous at all times, and sufficient to draw blood if you press your fingertip against it too hard." So unless you need a drop for your next diabetic test strip, maybe don't do that.

The Guard Father Spike is not much bigger than a beefy pen or marker and it even has a clip, so the temptation to carry it in your shirt pocket immediately presents itself. The trouble with that is, with the point peeking out like that all the time it's not only immediately obvious what it is, but it'll also be at risk of raking across your shirt fabric -- or you -- at all times. Tip down carry is not an option but again, knowing all of the above, maybe that wouldn't be a great idea anyway.

Someone truly dedicated could at least probably fix the stick-out issue by reprofiling the point so it sits flush when retracted, and then devise some sort of inverse cone shaped dingus to use as a pusher tool to safely stow the spike away. Possibly with the aid of a 3D printer or something. I'm sure I can think of somebody who could do that if I thought about it long enough.

The Inevitable Conclusion

I haven't consulted a lawyer on this or anything, but I also have to wonder if this will be technically legal to carry in locales that think they've banned automatic knives but haven't worded their laws quite cleverly enough to also encompass this.

The product blurb calls the possibilities for this device "endless," but I submit to you that is only so if you have a vivid imagination and endless patience for making up new descriptions for "stabbing things." This may fill an invaluable niche if you are, say, Fox Mulder or Agent 47. For the rest of us, though, probably not.

But it sure looks mean as hell, and I'll bet you none of your friends have anything in their collections quite like this.

I don't know what it says about me or this knife that I keep meaning to post it here, but somehow forget that I have it. It's happened like six times already. Which is odd, because I bought it specifically for this feature.

So, here you go.

This isn't a Reate Exo M, but it looks like one. And the genuine article costs damn near $300 and I'll be stuffed if I'm paying that for a fiddle toy I can't leave my house with, since gravity knives are illegal to carry where I live.

And yes, it does indeed open with Nothing But Gravity, as the description is always ready to remind you. All those guys with the shaved heads and the really esoteric interest in flags with eagles on 'em got really excited when they saw that, I'll bet. Yeah, it's because chucklefucks like them why these things are illegal.

This is a knockoff of the Exo M, and I got it from the usual scumbags for about twenty bucks. It looks the business from arm's length, and it works pretty well too. The blemishes in the anodizing notwithstanding; they're really tough to spot in person but the ascetic lighting in my photo box makes them really visible. That part's kind of a drag.

It works by way of this captive pivoting mechanism, which allows one half of the handle to swing out a couple of degrees.

This clears the way for a pair of lugs on the blade carrier to slide down the track milled in the inner part.

The blade is then free to drop to the end of its travel via gravity, just like we all paid our ticket prices to see. Yeah, baby.

When the handles are brought together the lugs are held in place and the knife is locked in the open position.

If this all feels familiar to you, in a vague and dreamlike way, you're not wrong. It's the same mechanism all those fucking Carrot Knives use. Yes, this is what they ripped off. Well, joke's on them -- our rip-off is actually made of metal. So there.

The real deal is made of "ELMAX" steel. This one purports to be made of D2, and sports a lone marking on the blade to this effect. It does not bear any other markings or insignia. As usual the steel descriptor may or may not even be bogus, but it's not too tough to believe. D2 isn't that expensive these days.

A deep carry pocket clip is provided which works okay, but is a little too tight for my liking. It is not reversible, but that might be immaterial since the knife is pretty ambidextrous otherwise.

It does, however, have a sliding lock switch on the side opposite the clip that'll prevent the hinge from opening, fully locking the knife either open or closed:

It's right in place for a right handed user to operate with a thumb, but a lefty could probably work it with the index finger without too much trouble. Without it, it is theoretically possible for this to get wormed open in your pocket and since the only carry position is tip down, you might otherwise find an inconvenient extra hole in your shorts.

As the "compact" version of the Exo, this would be a comfortable EDC-able size if it weren't for the fact that a League of Nations goon squad would probably track you down and haul you up in front of Sir Geoffrey Lawrence if you actually tried to carry it anyplace. It's 4-1/2" closed, and 7-5/8" open, with a 3-1/8" straight-back blade that has a small false edge on the spine. The body is all aluminum and actually feels quite nice in the hand despite its squared-off looks, with some very positive crosshatching in the thumb area on the rear and positive jimping for your index finger on the front. The scale inlays are textured Micarta to give you something to push against when you're working the action. It's not too heavy, either: 92.6 grams or 3.27 ounces, probably due to mostly being made of aluminum.

The color, by the way, is not a camera trick or optical illusion. The aluminum parts are anodized in a rather pleasing gunmetal gray-blue. It'd be even more attractive without all those tiny blemishes in it, but which then again I suppose is why it was only $20.

The Inevitable Conclusion

A fidget spinner is probably less likely to get you arrested than having this about your person, but it's awfully difficult to use one one of those to open your mail. (Exceptions, of course, do exist.)

The problem with recommending these kinds of things is that there's no brand or model designation you can tell anyone to ask for. You might not know what you'll get, and you'll have to know what you're looking at. And if you know, you'll know. You know?

Well, guys. I said I was gonna.

I do'ed it.

The Cold Steel AD-15 is a big fuck-off shiny knife that looks like it could skin a crocodile. It is available in a variety of guises, and I of course was contractually obligated to get the green one which looks like a crocodile, too.

The "AD" is referring to this knife's designer, Andrew Demko. I am fairly certain, but not 100% positive, that the "AD-15" moniker is also a not-so-subtle reference to the AR-15. But I can't prove it. And every time I mention the AR-15 on lemmy this weird high-pitched screech starts up, so we'll say no more about it and move on.

The AD-15 is up my alley -- of course -- because it has a weird locking mechanism. It's Andrew Demko's "Scorpion Lock."

It's not entirely dissimilar to a lockback mechanism, but it's exposed and and works by way of dropping a fat pin in the knife's backspacer into a big notch on the heel of the blade. It's visible above, and locks home like so:

It's certainly novel. Cold Steel, meanwhile, have this to say about the AD-15:

The AD-15 might be the most comfortable, user friendly, sub 4 inch tactical folder we've ever made! Modeled after Andrew Demko's patented original, it offers ambidextrous operation and opens and closes with one hand.

Uh. So, about that.

Let me start with the size, because I'm not entirely sure why anyone would call this knife "sub" anything. It's fuckin' massive. 8-1/2" long overall open, 5-1/8" closed, with a 3-5/8" drop pointed blade that's a frankly ridiculous 0.145" thick and made of S35VN steel. But that's only part of the story. It's a full and complete 1-1/2" in breadth when it's closed which I believe makes it the widest-when-closed folding knife I own or have ever owned. Or possibly ever will own.

It has a zooty aluminum backspacer/lock, of course, but it also has full steel liners and the entire knife weighs 182.2 grams or 6.43 ounces. It is a very, very beefy 0.652" thick not even including the clip.

So suffice to say it's big. Discreet urban EDC carry: Completely off the table.

I'm not sure where "comfortable" and "user friendly" come into it, either. This is possibly the most difficult to open folding knife I've ever encountered.

That's not because it's tricky, mind you. The locking mechanism is deceptively simple and, dare I even suggest it, kind of elegant. But it necessitates the lock pin pressing against the heel of the blade with an absurd amount of spring force, all the time. Both the pin and the blade are polished smooth, but they still drag against each other throughout the entire opening process. And not only that, but you have to overcome the full sum total of the spring's tension whenever you try to open the knife as the cammed ramp on the back of the blade pushes the pin and thus the backspacer bar thingamabob up and away.

Here's the spring:

The net result is that an incredible shove against the thumb studs is required to even get the blade to begin to budge from its closed position, let alone fully rotate it out and open. Yes, you "can" open it with one hand -- if you have hands like an orangutan, which luckily I do. If you don't, well, tough. Most people will probably be forced to open it with two hands.

And closing it with one hand is right out. For anybody.

An ordinary lockback knife has either a hump on the spine or a cutout in the handles to provide you a spot to press, levering the other end of the lock bar out of its home and unlocking the blade. This doesn't. There's a knurled part of the backspacer/lock bar, but that spot absolutely is not for pressing. You're welcome to try, but good luck with that. You have to hold the textured G-10 scales with one hand and manually grab the lock bar with your other hand to lift it up. It's got grip ridges machined into it for this purpose.

You can almost kinda-sorta wedge the tips of your fingers in the gap between the scales and lock bar and try to finagle it out of its slot, but this is very fiddly and mildly painful, and both looks and feels ridiculous. So no, this knife essentially can't be closed with one hand.

The AD-15's clip is fairly traditional, and is drilled to match the lanyard hole on the tail end. It's not deep carry, but that's probably academic anyway. It is reversible. As it is, the clip is fairly nice if a bit tight, but drawing this knife from your pocket is also made much more difficult than it might appear at first glance because the scales are so damn grippy.

Normally that's a good thing, right? When you're wrestling alligators in the mud in the bayou, or whatever it is you're supposed to be doing with this knife, you don't want it squirting out of your hand. But the grabby scale texture also rakes against your pocket hems and makes this knife singularly difficult to draw without giving yourself an atomic wedgie in the process. It just will not let the hell go from your trousers.

We've methodically debunked pretty much every claim in Cold Steel's blurb by now. So... What's it actually good for?

Not self defense, that's for damn sure. If you plan to be accosted by ruffians, you'd better make an appointment with them first so you can spend the requisite half hour getting your knife out and opening it in advance. You could probably split coconuts with it if you wanted to, though. Or maybe cut down a tree. It is monstrously stout and I have no doubt the lock is fantastically strong. The S35VN steel is a very tough alloy and, combined with the absurd blade thickness, should be able to withstand careless use easily.

Overall I like the shape of the AD-15 and once it's actually open it feels great and very confidence inspiring in the hand. The blade is machined well and is a very neutral utilitarian shape that presents a wide belly for cutting tasks as well as a stout and close to centered point for stabbing. To assist in either of the above, your grip on the lock bar serves to clamp the blade even more firmly into the locked position so you can be pretty sure it's not ever going to fold up on you.

It has the aforementioned grippy scales, plus extremely chunky jimping on the back of the blade as well as the tail. You're probably not dropping it.

The blade is just about mirror polished and looks quite nice, too. Well, it will until you actually start using it for abusive outdoor tasks, anyway. It picks up fingerprints like a sonofabitch and I suspect scuffs and scratches will also be highly visible. That may eventually harsh your vibe.

Surprisingly for such a chunky and humongous knife, the AD-15 is actually only held together with two screws that are very easy to remove. It has one pivot screw in the front and another one just like it holding it together at the tail, around which the lock bar pivots. The two screws are also identical -- totally interchangeable.

Inside is the aforementioned spring, and the hollow pin that serves as its endstop is also the lanyard hole. The design is simple, and just tarnished slightly by how godawful difficult it is to use.

The size comparison speaks for itself, really. It's a big boy, no doubt about it.

The Inevitable Conclusion

While fiddling with this knife I tried to think of various ways in which it could be improved in the action department. I did try my hand at polishing the ramp on the back of the blade and it improved matters slightly, enough to make the thing at least possible to use, but still not pleasant. I thought about other hypothetical mechanical changes like a lighter spring, or adding a hump to the backspacer, or relocating the pivot point, and ultimately I decided the hell with it: The best way to improve this knife would be to keep it shaped just like it is, but make it a fixed blade.

And really, that's what the AD-15 is. It's a fixed blade masquerading as a folder. It'd be better if it dropped the act.

That kind of thing has been tried many times before and honestly it never quite seems to work. You can tilt the scale one way or the other, and make no mistake that the AD-15 tilts it pretty damn far, but making a fixed blade fold or a folder as strong a fixed blade always seems to require making sacrifices that wind up defeating the purpose.

And that's a crying shame, because I really want to like the AD-15. In some senses, I do. It's just too bad it's impossible to bloody use.

Maybe I'll just make a Kydex sheath for it and call it a day.

Sigh.

I already made the René Magritte joke previously, so I can't very well use it again. So, I've been staring at the blinking cursor for the better part of five minutes now trying to figure out how the hell I'm going to write a hook to put in front of this friggin' thing.

This is, very emphatically, not a Benchmade Model 87. Yes, yes, I know what it looks like. But it's fake, mon. No question about it.

It is, in fact, made by prolific balisong cloners TheOne. On this I am a bit of two minds, as usual, because on the one hand it's a total Chinese ripoff of Benchmade's design and on a certain fundamental level that's not cool. But on the other hand, the manufacturer casts no illusions whatsoever over what it is. It is marketed directly and up front as a clone -- not, meaningfully, a counterfeit. You'll notice it doesn't sport the Benchmade logo on it at all. It arrived in a plain white box without any stolen trademarks on it.

The thing is, see, that it exists for the express purpose of acting as a consolation prize for all those people who will never in a thousand years actually have the opportunity to own a genuine Model 87. I include myself in that group. I'll leave this here for an illustration why; even when the damn thing was available it was $550, and Benchmade produced a grand total of about seventeen of them before discontinuing it. Now they won't sell you one for any price no matter how much you want one. So if they're worried about losing a sale, maybe they could actually manufacture some damn product for a change.

Oh, but then the first run buyers will all howl that their resale value is being diluted by increasing the supply. Cry me a fucking river.

Sharp eyed readers will note a couple of minor differences between this and the Benchmade original, notwithstanding the missing markings. The Model 87 has a Torx headed screw in latch head pin, whereas this has a plain press fit one. And the genuine article's blade is CPM S30V, and this is D2. And the Benchmade has ball bearing pivots while this has bushings and phosphor bronze washers.

All of the rest of it, though, is spot on. I'll cut to the chase right here and say that the build quality and bill of materials here is actually astonishingly good.

The balisong knife market is, of course, famously insane. But now we're standing on both sides of the bell curve simultaneously, and I get the feeling history is starting to repeat itself in ridiculous ways.

In the beginning we start with the various big name knife manufacturers like Benchmade and whoever else, who produce high quality knives and get popular, and then they get expensive. So the clone manufacturers have risen up to compete with them -- typically by ripping off and reproducing their designs, of course -- but now the clone manufacturers are getting super popular, too. This is turning into big business, and enthusiasts are flocking to these knockoff knives which are improving by leaps and bounds. Now, we've got knockoff manufacturers that have a reputation for quality, with a real name for themselves and actual dedicated fans. So their prices are starting to creep up, too. There are clone knives that cost upwards of $300 nowadays.

This isn't one of them, though. This knife costs around $100. For what you get, considering the price of enthusiast balisongs in general, that's still an outstanding deal. But it's still not exactly what I'd call cheap. So what's next? Will another cheaper clone maker step up and clone the clones?

What you get for your hundred bucks is a 1:1 scale model of the Benchmade Model 87. The same dimensions, all around. So it's a big knife, very chunky overall with a wide squared off aesthetic. It's 5-7/8" long closed, fully 9-15/16" long open, with a 4-1/4" blade that's got a trendy reverse tanto point. The blade is 0.121" thick with a nicely rounded spine. And while it has a machined finish left on both its flat and its bevel, it's very fine and reminiscent of that on a Spyderco knife. It's not unattractive at all. The grind is also completely flat, which I did not at all expect.

The hardware all faithfully reproduces the decorative machined glaive style screw heads of the Benchmade. Yes, the handles are genuine titanium and are unitary channel-milled slabs exactly like the original. That leaves the entire knife weighing in at a not insubstantial, but deceptively light 156.8 grams or 5.53 ounces.

The latch is this non-protruding style that drops out the bottom. It is indeed spring loaded, and pops out the bottom when you give the handles a moderate squeeze.

From a usage standpoint there isn't a single fly in the ointment. The genuine article is probably better, no doubt, largely owing to its ball bearing pivots. But TheOne's knives are designed for use and in this "BM87" it shows. Doing flip tricks are precisely what these are for. The machined handles feel excellent in the hand. The knife pivots freely precisely as you would expect, the rebound action is great, and the spring latch is immensely satisfying. The latch will spring out from either the latched shut or latched open positions, and the torsion spring hidden inside keeps it standing out and well away from both the handles and blade so you can't strike either one with it while you're manipulating the knife.

In addition to a baggie containing a complete replacement set of pivot hardware, mine came with a card in the box proclaiming it was pre-tuned at the factory.

This threadlocker on the pivot screws is as it was delivered. I broke it loose when I took the knife apart for my disassembly photos. It seems like someone went ham more on one screw than the other, but the action was fine when I received it and it wasn't difficult to take apart at all.

The wiggle test reveals what we already knew, of course. While it won't match the uncanny squareness of a bearing knife, it's still pretty good for a bushing pivot model that has such long handles. The presence of the bushings means you can fully tighten the pivot screws and the handles will not lock solid. Here, as pictured, is with the screws as tight as they'll reasonably get.

This is of course a "live blade" model and it comes with an edge already on it, although my example is not actually very sharp from the factory. This may be by design, or it may just be where the penny was pinched. The edge grind is dead true, though. If you plan to use this for real cutting tasks and not just showing off you will probably want to give it a sharpening once over but the good news is that this won't be difficult at all. It is sharp enough to draw blood if you really fuck up and do so with gusto, but it's such that you at least have a chance of not breaking the skin if you make a minor mistake and graze yourself on the bite side without too much force.

Here are the guts. As a channel milled knife, the bill of materials is not very long but it's still impressive. The handles are as stated solid titanium through-and-through. The washers are indeed phosphor bronze, and each pivot has a precision bushing going through its respective hole in the blade.

I can't fault the machining work in the handles. I'm staggered; I just can't shut up about it. You get that much solid titanium for the price? This is not how Chinese knockoff knives are meant to be.

What you get in each pivot is this stack. Two bronze washers, the bushing, and a Chicago screw. The assembly goes together like this:

The latch reproduces Benchmade's novel design and uses a torsion spring for its mechanism.

Despite how it looks, it's actually very easy to take apart and put back together. There is a hole in the shank of the latch, and an index notch in the handle beneath the screw head. You can just drop the spring in place and it'll work -- you don't have to mess around with keeping it under tension or anything before you can cap the screw off.

The latch components.

Obviously I haven't got a genuine Benchmade Model 87 to compare to. But with this thing being such a full size knife, I think the nearest equivalent I have to act as a stand-in is the Kershaw Lucha.

The BM87 is thicker than the Lucha, at 0.433". There is no clip to subtract from the measurement, because it hasn't got one. It is tapered, and very wide at the flared end: 1.491". It's noticeably wider than the Lucha as well, all the way down its length.

The Inevitable Conclusion

As a clone knife, this TheOne is always going to have a bit of a stink following it around. All the forum oldheads will turn their noses up at it and it'll never actually be worth anything or appreciate in value like a Benchmade would. But that's not the point.

I fell down the rabbit hole of researching clone balisongs as much as I dared before I bought it and I'm still mystified at the following these things have. People get into clone knives -- big time. Now I can see why.

Even just as an objet d'art this is fantastic, but it also has the benefit of being designed to be used. If one day you send it windmilling off onto the pavement you're bound to be a lot less broken up about it, for instance. And if you totally bin it, you can just buy another one. That's not a luxury you'll have with a limited run collector's item.

I've always maintained that a knife is best when it's able to be used. Sure, I have a couple of drawer queens in my collection slowly gathering dust and appreciating value. But as a whole I try not to.

If you've been eyeing one of these but you're sitting on the fence because you're afraid it might be crap, here's your verdict: It isn't. Be shocked, or be appalled, or be disgusted. But there it is.

Dissection of the Kershaw/Emerson CQC series, the continuation thereof.

This is part four out of however many of these. Obviously, I like the idea of the "Wave Shaped Feature(r)" opening gimmick, which is why I've got so many knives that have it. And so far, all of the knives of this ilk we've looked at have ostensibly been fighters of some description or another. But what if, like most of us, you don't have a case for using your Wave opener for spearing Daesh insurgents or whoever the hell? What if you have slightly more civilian outdoorsy aims in mind?

This is the Kershaw/Emerson CQC-11K in D2, model 6031D2. Kershaw explicitly bill this as a hunting knife, and its highly upswept tip has a definite dressy-gutty-skinny vibe. It's much less for stabbing and much more for slicing.

And if you're thinking, "Hey, wait a minute. This knife looks exactly like the Emerson Rendezvous," well, you're definitely not wrong. In fact, in their blurb Kershaw goes on to explicitly mention that it's based on the Rendezvous. But there's a critical inescapable difference here, namely that the Rendezvous is $267 and the CQC-11K isn't. Sure, Kershaw claims the 11K is "discontinued" but apparently they manufactured about a million of these and they're still thick on the ground. You can easily score one right now at the time of writing for only $35.

What you lose out on in exchange for the $232 price difference is that the Rendezvous is made of 154CM steel and the CQC-11K is made of cheaper D2. And... uh, that's it. There is no second thing.

The Kershaw version even has the Emerson Knife Designs logo right there on it, just like all the other CQC's.

The remainder of the design elements are singing the same old familiar tune.

We will now recite the hymn of the Emerson CQC knife. It has, yea and verily, the Emerson Wave Shaped Feature(r) pocket-grabbing hook, which snaps the knife open automatically when you draw it. It is assembled, doth and truly, entirely with slotted and Phillips screws. Bear witness, for it has a knurled disk rather than studs for manual thumb opening. The textured G-10 scale, indubitably, is only on one side leaving a smooth steel surface on the other for an easy draw.

There's one other difference, though:

Instead of the injection molded backspacer, the handle halves are instead spaced with threaded diabolo barrels. This doesn't impact functionality any, though. It's just how it is.

Oh, and because thou shalt use this for hunting and not tactical purposes, it is not black. It is brown. Brown makes it outdoorsy, don't you see?

The CQC-11K is also very, very stout. It's much more broad than the other knives in the series we've inspected so far. It's not fat -- it's just big boned.

It's a full 1-3/4" across when closed, and the blade is 1-1/8" tall at the horn at the top of the spine. The entire knife is about 8-1/2" long and the blade is 3-9/16" long from the forwardmost point of the handle to the tip. (Kershaw calls it "3.5.") The blade is 0.120" thick at the spine and the entire thing sports a satin tumbled finish. The bevel is hollow ground as well. Minus the pocket clip it is 0.418" thick not including the heads on the pivot screws, or 0.499" with them. It is 163.1 grams in overall weight or 5.76 ounces -- Neither svelte nor light.

Inside we see few surprises. The construction is very similar to the aforementioned CQC-4K, with the pivot riding on nylon washers. The one major detail is those diabolo spacers:

These are screwed into with stubby little short screws, rather than the hella long ones that pass all the way through the scale and backspacer on the other CQC knives.

Because of this the spacers stay securely attached to one side of the liner or the other, depending on which side you start taking the knife apart from.

The comparison with the CQC-6K says it all, really. If you want a big meaty knife, this one's for you.

It looks like someone took the 6K and stretched it out vertically to make the 11K.

Handling the 11K works about as you'd expect, but there is the notable quirk of the position of the pocket clip, which is pretty far down on the knife and leaves a lot of it sticking up out of your pocket. For the purposes of ease of access that's not necessarily a bad thing, especially out in the woods, but this is about the furthest from a discreet carry you can get without just strutting around in public holding the thing in your teeth.

As before, the clip can be swapped to the other side but it will be much grabbier on your pocket there because it'll interface with the textured G-10 scale rather than the smooth 410 stainless back side of the knife. For what it's worth, Emerson themselves do make a couple of left handed variants of their knives (for big bucks, of course) where the smooth and textured sides are swapped. But Kershaw doesn't make a left handed version of this one.

The Inevitable Conclusion

Since its damage type is slashing rather than piercing, this ought to work better on Unes and Venus Weeds and -- wait, what were we talking about again?

Oh yeah. The CQC-11K. It does what it says on the tin -- It's a CQC knife, but remixed for utility cutting tasks that align neatly with sportsmen's needs. Gutting fish. Dressing game. That sort of thing. In those contexts, I'm not entirely certain the presence of the Wave(r) opening feature is likely to be a make-or-break purchasing decision unless you employ the Jimbo and Ned "he's coming right for us!" hunting strategy. Or, if you absolutely must have something about your person to attach an (r) to at all times. Still and all, it's always nice to have and it transforms what would otherwise be an ordinary frame locking folder into a knife that's a bit special.

The major headline here is that if you were for whatever reason eyeballing something along the lines of the Emerson Rendezvous, it's a no-brainer decision to buy this instead. Lately I've been bringing up the point of undercutting the exorbitant prices of various big brand knife models by exploring their clones, but this is a weird one -- it's a case where a manufacturer has pretty much gone and cloned themselves, undercutting their own product with... their own product. That's pretty strange, and makes this knife well worth a look.

In addition to being a 1 for 1 substitute for the Rendezvous, the CQC-11K is probably a good stand-in for any of Emerson's other upswept tip knives that may have been on your shopping list like the Commander, Skinner, or Horseman.

I don't know about you, but I like saving a dime. That means I can spend that dime on more knives later.

"You need to buy this special heater pad to break the screen adhesive!"

No, I think you will find that in fact I don't.