Linux Questions

1149 readers

25 users here now

Linux questions Rules (in addition of the Lemmy.zip rules)

stay on topic
be nice (no name calling)
do not post long blocks of text such as logs
do not delete your posts
only post questions (no information posts)

Tips for giving and receiving help

be as clear and specific
say thank you if a solution works
verify your solutions before posting them as facts.

Any rule violations will result in disciplinary actions

founded 1 year ago

MODERATORS

possiblylinux127

[SOLVED] TFTP error: "Only absolute filenames allowed" (sh.itjust.works)

submitted 11 months ago* (last edited 11 months ago) by [email protected] to c/linuxquestions

4 comments fedilink hide all child comments

Workaround

I'm not sure what was going wrong with what I was doing initially, but, thanks to @[email protected], as suggested, I disabled the tftp server system service, and, instead, started it with the following command:

sudo in.tftpd -L /srv/tftp --verbose --permissive -s

and it then flashed successfully.

Original Post

I'm trying to flash firmware to a router (Archer C7) using TFTP, but, when the router makes the request for the firmware file over TFTP, the TFTP server responds with the following error

Error code: Access violation (2)
Error message: Only absolute filenames allowed

This is the config for tftpd in /etc/conf.d/tftpd:

TFTP_OPTIONS="-s"
TFTP_DIRECTORY="/srv/tftp"
TFTP_USERNAME="tftp"
TFTP_ADDRESS="192.168.0.66:69"

I have the firmware file in /srv/tftp, and both the firmware file, and /srv/tftp have chmod 777 permissions.

The TFTP server is running on Archlinux, and is installed as tftp-hpa from the arch repos.

If I test as a client, I can get it to download if I specify the full (absolute) path to the file /srv/tftp/filename, so it seems that the config isn't pointing the server to /srv/tftp as the relative path... How would I go about fixing that?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 11 months ago

I set TFTP_DIRECTORY="/", and then restarted the service, but, unfortunately, it didn't work.