Don't know why but i my printer has been printing the first layer unevenly
this post was submitted on 03 Mar 2024
16 points (94.4% liked)
3DPrinting
15570 readers
199 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
So... that looks a bit under extrusion to me.
I recommend Teaching Tech's calibration guide as a great place to start; If you haven't the guide is meant to be worked through in order- each step depends on the prior being accurate. In this case; if you've never looked at extruder esteps, that will through flow calibration off as well.
If you've already calibrated through it (or this is a new issue), it could be an clogged nozzle. "Do an Atomic PULL!!" (yes. you should read that in Peppy's voice...) It could also be something dragging on the filament (maybe it's pinched? or if you've ever lost control of the end, maybe it's knotted under itself,). from there it could be an extruder issue- the hobbed bolt might not have enough tension, etc.
For the record, The math for flow is the same as for esteps:
The caveat to this is, since you're measuring across multiple layers, and there will be a very slight unevenness between them, you'll want to eyeball it after the first test (which will get you close enough for government work.)
Side note, when you recalibrate flow, if you care about dimensional accuracy... you're gonna have to recalibrate x and y esteps. just an FYI. Also, this is where you should learn to love spread sheets. I have mine set up like so....
