The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:
Rule 1- All posts must begin with YSK.
All posts must begin with YSK. If you're a Mastodon user, then include YSK after @youshouldknow. This is a community to share tips and tricks that will help you improve your life.
Rule 2- Your post body text must include the reason "Why" YSK:
**In your post's text body, you must include the reason "Why" YSK: It’s helpful for readability, and informs readers about the importance of the content. **
Rule 3- Do not seek mental, medical and professional help here.
Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.
Rule 4- No self promotion or upvote-farming of any kind.
That's it.
Rule 5- No baiting or sealioning or promoting an agenda.
Posts and comments which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.
Rule 6- Regarding non-YSK posts.
Provided it is about the community itself, you may post non-YSK posts using the [META] tag on your post title.
Rule 7- You can't harass or disturb other members.
If you harass or discriminate against any individual member, you will be removed.
If you are a member, sympathizer or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people and you were provably vocal about your hate, then you will be banned on sight.
For further explanation, clarification and feedback about this rule, you may follow this link.
Rule 8- All comments should try to stay relevant to their parent content.
Rule 9- Reposts from other platforms are not allowed.
Let everyone have their own content.
Rule 10- The majority of bots aren't allowed to participate here.
Unless included in our Whitelist for Bots, your bot will not be allowed to participate in this community. To have your bot whitelisted, please contact the moderators for a short review.
You can view our partnered communities list by following this link. To partner with our community and be included, you are free to message the moderators or comment on a pinned post.
For inquiry on becoming a moderator of this community, you may comment on the pinned post of the time, or simply shoot a message to the current moderators.
Our icon(masterpiece) was made by @clen15!
Many modern motherboards will also do memory training the first time you boot with new RAM sticks, and sometimes this is very slow. Your PC will boot to a black screen and behave exactly like it would with a dead CPU or RAM... there's no visual feedback.
This once caught me off guard and I spent a good hour panicking trying to diagnose a non-existing issue. Sometimes, you just literally have to wait in a black screen for a while.
This seriously stressed me out when I put my last computer together. I was patient and waited hoping it would fix itself (which it did), but my heart sank when I didn't see anything on the monitor.
Good to know this is what is happening. Some visual feedback would be nice.
This 100%. Had a buddy recently that went as far as buying an entirely new PSU and memory kit trying to troubleshoot over 3 days. He just needed to let it sit for about 15 minutes to memory train the first time.
I have never run into this with any builds, at least in the last 15 or so years. Is this a more recent thing, or am I now finding out that my first build, circa 2007 on my new DFI lanparty mobo, may have not been a defect and I'm just impatient? That was DDR2 and PATA for a time frame.
Yup, I put new RAM in a brand new laptop after booting it up only once previously. Boot it up, black screen. I got insanely scared I messed up the display to mobo ribbon or something. Nope, just was doing its RAM thing and sat on a black screen for like a minute before actually booting to bios
I just bought an MSI motherboard. The memory slots are labeled, A1, A2, B1, B2. So of course it makes sense that the first populated slot must be A2. Followed by B2. Then A1, and finally B1.
Make sure the memory is in the right slots.
If A/B describe separate bus lanes, then A1, B1, A2, B2 make sense. If A/B describe your paired RAM, then A1, A2, B1, B2 make sense.
Only valid rule is to RTFM
Not always. But always confirm by reading the manual which slot order to use.
I call it “re-seating” the memory because it makes me sound like I have an actual clue.
I have half a clue and also call it reseating.
I have 40 years of PC building experience and I too call it “reseating”.
There’s probably a hundred reasons it might not post. One time, my CPU wasn’t seated properly. I have heard RAM is a common way. If you’re using only one stick, be sure it’s in the right slot. Edit: or even with two, make sure it’s the right slots, read that manual!
Multiple times I had issues with two identical DIMMs in a two-slot board, and simply switching both sticks to the opposing slot fixed everything.
Maybe it was a seating issue, maybe it was ghosts. Who knows?
Sometimes it can also be because you forgot to actually plug it in. 😳
I prefer to flip the PSU switch to the wrong position. Because there's no other point in time when I ever use that switch.
I've also fixed them by just unplugging them, holding the power button for like 30s, then plugging it back in.
It really shouldn't work, but hey, we tricked rocks into doing math for us with electricity, so what do you really expect?
IMHO...99 times out of a 100 (roll a die of your choosing for a multiplier, I have been at this for a long time), OP is right on. ONCE in a long while, it's PSU/mobo related.
A much dumber reason is because you forgot to install the riser screws before screwing in the motherboard and shorting the entire motherboard against the case.
My best friend did this on his first PC bless his heart lol
One time, my brother and I were building a new rig for him. After spending an hour putting the thing together, it wouldn't boot. Like, push the power switch and NOTHING happened. We called his buddy who's a real wizard with computers. His first question was, "Did you try reseating all the power connectors on the board?" And that's right when we discovered we didn't connect the power for the CPU.
I miss beep codes so you know what messed up.
I think all motherboards support this, they just don't come with speakers. You can grab a speaker for you motherboard for about $2 or like 100 for $20
All mobos are a bit different. Best tip: RTFM
Only higher end boards tend to have diagnostic lights.
I would say most mid range boards have diagnostic LEDs now. My gigabyte b450 board has some, for example, which I consider solidly mid range not high end.
As long as we're going for general tips, sometimes it's as simple as remembering to turn on the switch on the power supply and surge protector/UPS if plugged into such things (hopefully it is)
If something is super fucky and defying all logic, try a different PSU. It's the one thing apart from the motherboard that can effect every area of your PC.
I have a folder of photos on my PC, shared over the network. I could browse that folder fine locally. I could look in other shared folders over the network. If I looked in the photo folder over the network, the PC would power off instantly.
Swapped it out for a different one (I'd borrowed it from work while mine was being repaired), problem went away and never happened again.
There is zero logic I can see for this, and makes me want to throw computers down a well and live in a cave.
If your computer is acting haunted, its the PSU.
If its being temperamental like a fussy teenager, its typically ram.
If it's acting more like an elderly Belgian woman, you may want to update your BIOS.
This is fun.
I need more context. What are elderly Belgian women known for?
Waffles?
Ive built 7 or so computers in my time
in that same time 3 PSUs were DOA, 2 died a month in under pathetic loads, and one fried in a lightning strike (this one gets a pass as only the PSU fried so it did it's job)
It's so often the goddamn PSU
This. I built a new machine and assumed the PSU was the least likely to be the issue. After testing the video card, ram, cpu and motherboard.... I tried my spare PSU and it worked great. smh
I've got a computer that randomly reboots itself for no apparent reason once every two months or so. Always outputs some cryptic information about some hardware issue on the following boot. It's a problem that's just far enough on the far side of the annoyance-to-effort curve that I've been just using it that way for years now without figuring out what's wrong with it.
My cousin and I have run into having to clear the cmos using the jumper in a couple of our builds before it would boot the first time too. Not sure why.
First check its plugged in. Then check the power supply is turned on. Then check that the power button is connected to the motherboard.
It's probably something dumb keeping your PC from working. You probably were worried about the memory or CPU so you paid attention. It's the trivial things that are missed.
The first paragraph is autobiographical. I messed all those up on my first attempt. :-/
The first time I built a computer, it didn't boot on the first several tries. Turned out I had the motherboard screwed onto the chassis too tightly, causing a short.
The list in your comment is a good one. There's just so many little basic electrical things that can potentially go wrong.
Well, the real YSK is that memory and expansion cards have distinctive positions they should take within each slot, with a detente that holds them in place. Your system will only work reliably if the devices are fully seated.
When you first assemble the system, plug and unplug each item several times so you get the feel of it. There will always be a distinct detente when the device is fully seated. It's a lot easier to do this exercise with everything out on the bench, rather than mounted in the case when it will be a stone cold bee-atch to reach in and reseat the parts.
and it takes a lot more effort than most people expect to seat the ram and get it to snap into place.
I spent half an hour arguing on the phone with someone telling them their ram wasnt installed all the way to push it down further/firmer and they kept screaming it wouldnt go any further and that i was gonna break their PC. I could tell cause they sent me pics. It was almost all the way, but not quite there.
I gave up and made them to bring it over, and I pushed the ram down with an audible click while staring at him. He had the good graces to say nothing but a sheepish thankyou.
I swear every time I build one it's the process of put it together, it doesn't boot, swap the memory stick positions, and now it magically boots!
The practice of pulling and reseating expansion cards and cables in an effort to eliminate poor connections and hardware-dependent boot errors is, in the ancient era of blinkenlights called gestures and incantations.
I had similar happen to me. Put all of it together, turned it on, then panicked a little when it wouldn't boot up.
Turns out one stick of RAM was not fully slotted in, so obviously that's not OK. Was easy to spot once I double checked components. Popped it back out and in, then it was good to go.
printers would often start working after an elevator ride, apparently. oh tech support
Some motherboards in 2024 still don't work if you put the ram in the wrong ram slots. I ran into that problem on an am5 board recently.
Indeed. Every motherboard has a small speaker that will beep if a error is found. Usually you can find the beep error codes for a particular board online or in its manual. I think for mine its 4 fast beeps to let me know my ram is not seated properly.
Every board does not have this feature, some newer ones do and for older ones you can buy a post beeper that inserts into a speaker slot. Your manual will tell you if you have one
Well older to a point. Go back to to anytime before late 2000s and every board had a speaker!
Unless you haven't attached the CPU power cables, only the motherboard ones. In which case it will boot, the fans will spin up, the SSD will activate, but it won't boot and it won't beep.
That was a fun one to diagnose :)
My aging work PC (Xeon E3 1230V2) regularly stops booting, and this works for me. It had 16gb of memory, but I had to throw out one of the sticks. The other thing that gets it working again sometimes is tightening or loosening the CPU cooler screws. Thankfully, it's old enough to still do the BIOs beep codes which tipped me off to the tightening the CPU fix. I've got some newer parts lying around (an AMD 2600x and 16gb of DD4) I'll turn into a full PC when it finally dies, but for now it just keeps going and going.