With a laptop and phone which both can use it my backpack while travelling is so much lighter and less bulky. For me it absolutely was a game changer, I just don't like that I need to carry a USB a to C adapter for all the legacy USB A ports.
Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Please don't post about US Politics.
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected].
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
Not as much as going from coax to RJ45, or from PATA to SATA, or from PC/AT to PS/2 to USB or Bluetooth, or from D-SUB to DVI to HDMI or Display port, or from the old serial and parallel ports to USB or Bluetooth (I mainly skipped SCSI), and I sort of miss having to turn the connector 360° around for it to fit...
A little disappointing.
I had been pretty well consolidated to just lightning cables for everything. It did what I needed, the connector is small, reversible, easy to use, and it fit most electronics for my family of four. I had built up a nice stable of accessories like power banks and charging blocks that fit everything and hadn’t needed to buy anything new in years.
The switch to USB-C came with great fanfare and seemed like a good idea. However it really doesn’t give me any direct benefits and I have to buy all new accessories. Now I’m in a transition mode for a few years where I need usb-c, usb-a, and lightning cables and chargers. Worst of all the market that I kept being told was leaving behind still has more support for usb-a - my laptop has mostly usb-a, even new model motherboards for building my kids gaming computers are mostly usb-a, I don’t see a good selection of usb-c chargers, power banks are still mostly usb-a, keyboards and mice are usb-a, kvms are usb-a, etc
Trying to switch to usb-c has meant more cable types rather than fewer. It has meant buying duplicate chargers and it has meant less convenience where usb-c is not really mainstream yet. Hopefully the market will more fully adopt usb-c quickly but I meant to be a late adopter to this transition and feel almost like an early adopter
It was great!
I could get rid of a lot of "extra" cords. I can just keep one usb c and charge my phone, my mouse, and headphones with one cord. Shoot, I can even charge my controllers now too. I like that they're becoming like outlets. Like, this is just how you get power to the device(S). Without searching for the "right" cord all the time.
Works great, rarely have issues with the port breaking unlike prior small usb standards, it's nice how ubiquitous it is so I have way less random cable connectors around.
I was pretty fucking disappointed how flimsy the jacks are.
I've had 3 phones and a laptop I had to replace because the USB-C jack started to wiggle and wouldn't connect anymore.
Is it the jack itself that’s wiggling, or the plug won’t stay in the socket and wiggles too much?
If it’s the latter, take a staple and bend it straight, and VERY GENTLY drag it round inside the port, avoiding contacts, scraping out the lint and dust that has almost certainly become impacted at the base of it over time. I do this whenever cables don’t want to stay in anymore and it’s amazing how much of a difference it makes.
I have had one example of the port itself becoming loose, but mostly I’ve run into the lint/dust problem.
The short end of a cable tie also works supprisingly well if you've got any around.
Probably better to use a toothpick in that case.
Toothpicks aren’t usually thin enough in my experience, and I’m more worried about the tongue getting bent by the toothpick than I am about the bottom of the port getting scratched by a staple. But I agree a staple isn’t ideal, it’s just the common item I’ve found that works best. I’m sure there are better tools.
I find the plastic floss picks work really well because they are flatter than regular tooth picks. It has to be the type where the back part is a pick as that's the part that I use.
Personally, I like the iPhone charging port better as there's less that can go wrong with it, but USB-C is pretty good too.
I like that I don't have to orient the cable plug-ins just right. I can flip it over and still plug it in just fine. That's why I don't like mini USB, micro USB, or USB-A
Yeah Lightning was really nice. I was surprised how much I liked it after switching from Android to iOS. If only it weren’t proprietary and had too few pins to be very useful outside of charging.
I still hated that my phone didn’t use USB-C though, since everything else I own does. Glad the new iPhones do.
Not a game changer at all. In fact most of my peripherals still use the older style usb connectors. I’m not planning to run out and buy new everything.
I would like to see appliance chargers switch to USB-C. All these stupid wall warts for electric toothbrushes and shavers are ridiculous.
Like others, USB-PD is amazing. My monitor has 90W which is plenty for my laptops. Gaming laptop, not so much. The only device I have that isn't USBC/Thunderbolt is the damn mouse. I rarely ever need a USB A port for anything other than charging. Even my flash drives are all USBC.
I have been able to use 1 charger for almost everything for several years now. Sometimes I have a finicky device that doesn't like the high wattage PD chargers and will only trickle charge, but work fine with my other smaller charger. The GaN chargers are nice and compact. I break USBC cables a lot less often, but that is because I am a walking disaster most of the time. I would break micro USB cables constantly, or rip the ports to pieces.
One note though on USBC ports on a monitor. Beware using the really really stiff cables on ports that are positioned where the cable would be parallel to the table instead of the port pointing down. That port will definitely wear out or break entirely from the constant downward force and lack of support of the cable in the port. This is especially true if you use a monitor arm and the cable gets moved. Seen this on both Samsung and LG. My Dell points downward. I really like the pro PS5 controllers as it comes with a little cage that holds the USBC cable in place and protects the port from exactly that scenario. These monitors absolutely need something like that, especially with how expensive they are.
So much harder to solder, making repairing my stuff more difficult :(
Also, a USB cable is no longer a USB cable. Now I have to guess what the rated wattage was, if it's power only/data only/mixed.
All in all, a step back in my opinion.
Thats interesting - how many wires are in the actual sleeve, compared to an older USB?
Oh wow, yeah that must indeed be a pain to solder. Though I guess there's some redundancy built-in, such that if one wire goes down the cable can still deliver something?
Though I guess there's some redundancy built-in, such that if one wire goes down the cable can still deliver something?
You guessed wrong! If one is misconnected the whole thing breaks down :) It's a nightmare for repairability, as the plug is often the first thing to fail
Power only/power and data already existed with Micro USB, so that part didn't get too much worse.
I think the real game changer here is the USB-PD. I now only bring a single charger for both my laptop and my phone. Also, a lot of different laptops now charge with USB-C, getting rid of the need of different plugs.
Props to the Thinkpad USB-C retrofit hack. Granted they only work with 65w, but it is still great! My Anker Nano GaN charger is only a little bit larger than an ice cube, definitely smaller than most traditional USB charger, yet it packs 65w.
What does GaN stand for in that context?
Galium Nitride. It makes high current DC stuff more efficient (i.e. generates less heat) and requires less circuitry (i.e. smaller devices).
Thank you
It changed my economy game.
Now I have to buy an USB-C to USB-A adaptor to plug USB-C stuff into my already standing devices. Honestly, no idea why didn't they make it connector-compatible. Wasn't that the entire point of the "U" in "USB"?
Because USB-A sucks donkey balls and needed to die in a fire.
Wasn't that the entire point of the "U" in "USB"?
Nah, the point of the “U” in “USB” is so that devices communicate in a standardized way through a standardized bus. The port itself doesn’t need to be universal—after all, USB-C is I believe the first time that the host port and the device port are the same, previously there was always an A for host and B for device, even with mini-USB and micro-USB.
Pretty much no way to do so without losing most USB-C benefits.
They really wanted to put an end to this meme.
But manufacturers wanted a micro usb replacement and this is what we got.
Usbc-pd is an absolute game changer as an off grid person. The fact a 100w charger can act as a dc to dc converter with up to five output voltages, at up to 100 watts is crazy. And that the protocol automatically detects and communicates the proper voltage is very convinent. The problem is that usbc-pd 100w chargers are expensive and you need to know what you are doing if you want to diy power appliances with it.
Its really nice to have a standardized cable that just works and can be plugged in both ways. We really are approaching a Universaal Cable after a quarter century of RnD.
Now I need to deal with USB-C to micro USB and USB-A for my old devices. Things will be better eventually, I guess, but it's just shifted the annoyance around for now.
My phone is slightly easier to plug in though.
It's nice that my phone charges quickly, but otherwise I don't notice. It's just one more cable type I need to search for.