This screams dear frozen yogurt, you are the celery of desserts, be ice-cream or be nothing. Zero stars
Except, when you believe in something you sign your name to it.
BigDanishGuy
joined 1 year ago
I know not all Americans are morons, but too many are too complacent. A few extremely wealthy men have bought the political system and are pitting decent and democratically inclined people against a large group of purposely uneducated downtrodden people. The first group is complacent and more concerned with decency and their own standard of living, than they are in fixing the country, and the second group is seeking out ways to piss off the first group, while feigning indignation when they're called out for it.
When I suggest revolution and eating the rich, I'm only partly kidding. Don't eat them, feed them to pigs instead. But you seem to think that I'm trying to be funny, I mean why else omit my suggestions? I'm not kidding. You need to declaw some rich people, so you can get rid of that awful electoral system and impose term limits for all higher public offices. And if declawing the rich ends up with a few rich white men dieing, then that's a small price to pay. The actions of the same men kills Americans all the time.
But I know that it's not time to invest in the pitchfork and torch industries, because too large a group of people are too complacent to actually risk anything.
So we can't make fun of the upholstery burn marks on Vance's junk, but the freaks are carrying mock sperm to weird us out?
Dear Americans, eat your rich, have a revolution, institute term limits for all public offices, or do something else. But please: sort your shit out.
China was an American ally right up to 1949. Americans were pretty fond of China before and during WWII.
Only some of China though. The US and the Republic of China are still pretty close. The US and the People's Republic of China on the other hand... Part of the US's demands for Japanese capitulation were that Japanese forces could not surrender to Mao's army, but only Chiang Kai-shek.
If you fix the problem, and you've managed to not get caught being the cause, by anyone who survived, then you're the hero
And here I thought it was a birthday party for an autistic kid and their special ed friends
If anybody ever asks "what would happen if you put a group of ADHD dads in a pool with pool balls and gave them half a beer each?" then show them this picture
Best tattoos are done in prisons. Those are the tattoos with depth and meaning. Much more organic than store bought tattoos. The tattoo artist has a bond to their tools, as they've crafted the tools themselves and they mix the ink right in your cell. And besides, anyone can get a tattoo, but you will have a tattoo with a story and real price. Imagine instead of going oh that? I got that tat because I was bored and had spending cash, you can say I got that tat when I was locked up for robbing Wendy's with an alligator, the infection almost cost me my arm, but it was worth it
Obviously that was all /s but somehow I think I need to point it out.
Jeg foreslår et automodfilter: slet alle posts hvor strengen "Ibi-Pippi", og div permutationer heraf, indgår.
Mit personlige filter fejlede åbenbart i den her situation, men jeg mener at verden ville være et lidt (meget lidt) bedre sted, hvis alle ignorerede trolls som bl.a. før omtalte person.
The only cool part I thought was looking through the binocular things and spying on other tourists. I was an odd kid whatever
Yes, that is indeed extremely strange behavior. I don't believe that it has ever been reported before /s
Ja, det er godt nok underligt at man først lige nu har fundet ud af det... meget underligt, men det må jo være det der er sket
11
Issues with layer adhesion post bimetal heatbreak and hardened steel nozzle install.
(sh.itjust.works)
UPDATE:
Never before have I seen an entire maker community go "WTF are you doing you MANIAC! Just frigging buy it instead". I'm impressed :-) Normally I have to solicit such a strong response, this was pure ignorance.
I don't know whether we'll go forward with the 3d-printing part of this project anymore. If we do, I do hear you on the PETG, and it's not out of the running anymore. I may take the project on in a much smaller scale, on my own dime, so I can still try out some exotic materials (ie not pla).
In response to the cost per wand. I've found mailbox red TPU72d from kungfuflex for about 43USD per kg. I made a mock-up of the wand with 2mm walls, and at 220mm length it comes out to about 54g per wand. That's about 2.5USD - if nothing goes wrong and I don't waste a spool by printing unattended.
I think there's still something to be said about being able to form the wand to fit snug on the specific flashlight. Maybe the solution will be purchasing wand attachments and making an adapter for them.
ORIGINAL POST:
I'm designing a wand attachment for a flashlight. The wand attachment will be about 170-200mm long, slightly cone shaped, and fit securely onto a given flashlight. When attached to the flashlight and the flashlight is turned on, the flashlight will illuminate the wand giving of a red glow.
The purpose of this is to use the wand for directing traffic at night. Don't worry, we're licensed to do so and typically asked by the police to do it.
See the picture for an idea of what I'm trying to explain. Disregard the tape and the fact that it's white PLA. The white PLA is what I had open and the flashlight is not the same as will be used with the final device.
The attachment will be produced in 70-150 copies and handed out to volunteers of my national guard company. The final attachment must therefore be able to take a beating, ie scratches, impacts, temperatures and various rough handling.
I have at my disposal a pool of +10 Cr6-se, one ultimaker s5 and one stratasys uprint se plus.
I'm considering a couple of material choices. TPU or PETG in a couple of the cr6s or PC in ultimaker. The uprint strictly uses some proprietary ABS spools, and all the filament I've got for that is ivory white. A buddy of mine has offered to print a release candidate in flexible tough resin. But I don't think that he has any idea about the scale of the project. So it really narrows down to TPU, PETG or PC. If I'm going to make this rigid I'm going to go for PC, for durability, or TPU for flexibility and durability.
I've found a source for PC in transparent and white and TPU (72d, 95a and 98a) in transparent, red or white.
I like the TPU72d in red, but is it the right material? I can't find anything on the translucency of opaque TPU. In the picture it's just 1 mm of opaque white PLA, but what about 2 or 3 mm of TPU? Should I just drop the illusions of red opaque TPU and print in clear PC and spray a coat of red paint on the inside? Or clear TPU?
WYD?
We had a bit of rain these few days. 110ish mm over the last 14 days, 25 of which decided to check in on us yesterday. So our run got flooded.
Not having the space for a truck load of woodchips, nor the time to spare, I got a couple of 23kg bales of sawdust. BTW .6USD pr kg for sawdust, what's wrong with the world?
The chickens were quite perplexed as to the bale when it arrived, and definitely not sold on it either when I had spread it out, pic in comments. I'm going to see how it works before spreading another one.
Usually I don't have to pump water from this area before November, but I guess that life ain't fair and the world is mean, so we started the pump this morning. Next 5 months (we'll I guess it'll be 6 months if luck be) we'll be pumping about 26m^3 from this area daily.
There's a Danish children's song that starts with something like "The farmer is always busy on his farm" and then lists the chores. I wonder why I that was stuck in my head as I wandered about the hardware store looking for bedding material.
Solution: @[email protected] has made some really insightful comments below, which are really useful. ~~If you just want the cap you can set the parametric searches for 660uF, or in September 2023 I've found that digikey stock(s/ed) chemi-con EKHJ451VSN661MA59M~~.
Update 2: Turns out that EKHJ451VSN661MA59M is not the ordering code you'll want. That would be EKHJ451LIN661MA59M which returns 0 results when you Google it, or maybe a single result in a few days linking to this thread. So it looks like you'd be better off just getting some 680uF with blade snapins instead and retrofitting the board if possible. Just make sure it can handle the ripple current. Always check ordering codes twice my friends!
Original post
I need help identifying the terminals on some strange caps found in an AC inverter main board. The reason I state the AC part, is that the only other mention I've found of this layout, was a question on digikeys forum regarding an AC inverter https://forum.digikey.com/t/can-t-find-the-right-terminals-for-a-capacitor/19332 The capacitor in question has the same measurements as the one in the link.
In my picture on the right you can see the layout of the terminals, there's room for three caps, but only two was mounted, hence the relatively clean pads. On the left is one of the two caps in question. It says nichicon LQ(K), 85°C. Nichicon has discontinued the LQ-series, and the datasheet doesn't mention a 660µF variant. I don't know what fujitsu did to get caps with capacitance outside the E24 series.
Question: What is the name of this type of terminals? And more importantly: where can you get 680µF 450V caps with them? I haven't found them on neither Farnell or RS-Online.
For the sake of people googling this in the future, the AC in question is a fujitsu AOYS09LDC and the board was marked K05CM-C-A(03).
69
When it's midnight and you just need to get the moccamaster ready for the morning before bed... but then the ADHD rears its ugly head
(sh.itjust.works)
The pic may not be nsfw ... but the words uttered at the time certainly were!
view more: next ›
Switch to the mid 90s when we had to memorize all the 16 variations of "der" at age 12, because we had to take German as our third language.