HelixDab2

joined 1 year ago
[–] [email protected] 5 points 9 hours ago (1 children)

I have a polyester ski jacket and I haven’t frozen to death on the slopes yet.

Have you tried falling through ice into a river yet? Give it a shot, let me know how it goes. Get it completely saturated, and then hang out in sub-zero temperatures for a few hours or overnight. If you survive, try the same exercise in the same kind of layers of wool clothing.

which is not peaceful, look it up on YouTube

Read what I actually said again: shearing is not INHERENTLY harmful. It can be harmful, on farms that are careless in their treatment of livestock. But how many videos do you think PETA is going to put on YouTube of sheep shearing that doesn't hurt the sheep? Or do you think that maybe they'll only post videos that reinforce their position?

then maybe don’t breed them into existence?

We're well past that point; they already exist. Are you suggesting that we should slaughter all of them...?

You also fail to mention that all sheep go to a slaughterhouse where they are killed by stabbing at a fraction of their natural lifespan.

That's not actually relevant to the production of wool though, is it? It's utterly irrelevant to the wool; you could let the sheep graze and shear them annually, and allow them to die of natural causes, and it would make zero difference to the wool itself.

Source?

The vast majority of the microplastics that are going into everything on the planet are from synthetic fibers, particularly polyesters. (source) The product itself, not just the creation of the product, is harmful to the environment. Most synthetic fabrics degrade by breaking down into smaller fibers, rather than actually rotting away, so you get harm done at both ends of the produce. Natural fibers (and rayon, which is cellulose) will biodegrade completely over time. There is no way to mitigate the damages caused by microplastics; we don't have an effective way of removing them from the environment. Conversely, carbon dioxide can be mitigated, by reducing reliance on fossil fuels, and by reforestation. (Although, TBH, we don't mitigate it, and we're already past the point of no return, so...)

27 times more greenhouse gases than a comparable cotton sweater

...Except that these items are not comparable, because they perform differently under adverse conditions. The similarities are in the form, not the fiber. Sure, if the extent of your exposure to weather is walking to and from your car in the winter, you're never going to notice a difference. If you go camping for a week in the Tetons in January, you absolutely WILL notice the difference. Cotton has to be heavily treated--with Teflon, with parafin or beeswax--in order to be water resistant; wool is naturally hydrophobic. That's pretty important when you're outdoors in cold weather.

[–] [email protected] 1 points 12 hours ago

Cigarettes, cigars, and pipes still smell wonderful to me, and if was free and wasn't going to kill me, I'd absolutely start again. But I haven't had any real cravings or dreams about smoking since about four months after I quit.

[–] [email protected] 1 points 12 hours ago

Benzo withdrawal will kill you, but goddamn is it hard to kill yourself with benzodiazepines... You'd think that something with a deadly withdrawal would also be easy to OD on, but no.

[–] [email protected] 3 points 13 hours ago

I'm pretty sure I know what I smoked.

I quit because I started coughing up dark brown shit every morning; I always had some kind of congestion in my throat. I decided that I didn't want to do that anymore, so I stopped.

[–] [email protected] 9 points 17 hours ago (8 children)

No. Polyester simply doesn't have the same properties that wool does. Polypropylene is a good base layer for moving sweat away from your skin, but won't keep you warm when it's soaked. Cellulose fibers (cotton, linnen, hemp, rayon, etc.) soak up water, and will kill you from hypothermia in cold weather. Also, shearing sheep is not inherently harmful or abusive; on the contrary, sheep that are not shorn may become immobile due to the bulk of the wool. Sheep have been selectively bred for thousands of years for wool production, and so failing to shear a sheep is harmful to them. Additionally, wool is FAR better for the environment overall than any synthetic fiber, which are all made from oil.

[–] [email protected] 8 points 17 hours ago (1 children)

The primary difference is that Merino wool comes from Merino sheep. As for what makes the wool special, it appears to be the size of the fiber itself. The USDA has specifications for wool grades based on the size of the fiber, and Merino wool fibers range in size from <18 microns to 26 microns; for reference, a human hair ranges in size from about 50 - 100 microns. That puts all of Merino wool at grade 62 or better. Because it's a finer fiber, each individual strand is more flexible, which makes it less scratchy. The flip side of that is that a lighter fiber means that it's also less strong, so Merino isn't well suited to outerwear that's going to be used in more austere environments. Wool in general doesn't have very good abrasion resistance, and a very light fiber will be much less so.

Any wool base layer made from sheep's wool should keep up just fine, but a coarser wool is going to feel less comfortable against your skin. I have an old Army milsurp sweater, and the wool is very coarse; most people would not find it comfortable on their skin.

[–] [email protected] 4 points 17 hours ago (9 children)

nicotine is the hardest drug to quit.

Wild. I've quit smoking multiple times, and thought the first week or so was unpleasant each time, but not awful. Each time I started up again it was because my ex-spouse started smoking again and was pushing cigarettes on me. Since the divorce a decade ago, I haven't had a cigarette. And that was after about fifteen years of smoking around a pack and a half a day.

I know that quitting drinking all at once can straight up kill you, if you're a hardcore alcoholic; I've known a few people that had the shakes every time they were sober.

[–] [email protected] 1 points 19 hours ago (1 children)

It's not that any one person can gridlock Congress, but that the more people you have, the more difficult it is to get enough of them pointing in the same direction to get anything accomplished.

[–] [email protected] 4 points 1 day ago (1 children)

It isn’t legal to own hand grenades in the US

Not correct. It's an 'other destructive device', and is covered under the National Firearms Act of 1934. Each one would require completing a transfer form, waiting for approval from the ATF, and cost $200 for the tax stamp. ...And would then be usable exactly once.

You might be able to manufacture a grenade with an ATF Form 1 approval, but I'm not positive. And, again, it's a single-use item that requires a $200 tax stamp.

[–] [email protected] 20 points 1 day ago (2 children)

How have you forgotten Remedy, with Alan Wake, Control, and Quantum Break?

I feel like Finland might be where I belong. If only I could realistically learn Suomi...

[–] [email protected] 2 points 1 day ago

Lots of weirdly emo ballads, TBH. The metal is good, but it's still pretty niche from what I understand.

[–] [email protected] 2 points 1 day ago

It depends on what you're doing with it.

I use it solely for Ace XR, which is a dry-fire simulator/tracker. Ace XR is available solely for Meta Quest (2 & 3), so I didn't really have many options. Unfortunately, I'm currently rehabbing a serious injury, and I am unable to practice.

For gaming? Not really. I like the PSVR2 headset more for that; it's a better headset overall. I'm still working on getting it set up to work with my PC though. As other people have said, getting corrective lenses for a headset really makes them more enjoyable if you need glasses; it's a pain in the ass to have to put in contacts when I want to use VR. For the Meta Quest specifically, and upgraded head band and spare battery (that also acts like a counterweight) is very nice to have.

 

I'm a grown-ass adult, and was diagnosed as being on the spectrum quite late; Aspergers wasn't even a valid diagnosis until after I had graduated from high school.

So, haven't really had a lot of support.

Just wanted to check in with other people - what does a meltdown mean for you, in terms of communicating? When I'm feeling emotionally overwhelmed, I have words in my head, but I can get them out of my mouth. If I try to write things down, I either have the same block, or I'll write, erase, re-write, erase again, and repeat tens of times until I give up.

 

Win 11 IoT Enterprise LTSC, 10.0.26100, AMD Ryzen 9 7900X3D processor, 64gb RAM, ASUS ProArt X670E-Creator mboard, AMD Radeon RX 7800 XT graphics card.

All other drivers except the graphics card driver be up-to-date and working correctly; they have been updated directly from the manufacturer sites.

Every time I try to install the most recent graphics drivers (amd-software-adrenalin-edition-24.7.1-minimalsetup-240718_web), I get about 48% of the way through the installation, and then get a BSOD, with the stop code KERNEL_SECURITY_CHECK_FAILURE. I've already tried using the AMD removal tool, rebooting in a clean environment and safe mode to reinstall, and had the same issue. Their driver installation tool gives me the option of installing PRO 24.Q2 (which appears to be for their PRO W and PRO WX series of graphics cards, rather than the RX 7000 series; it's listed as a downgrade), but gives me a 195 error when I try. I've just sent the DxDiag.txt and MSinfo32.nfo to AMD tech support.

Since I'm not running games yet, this isn't impeding much of anything. However, I am having issues with my Meta Quest 3--specifically the link software--but I don't believe that those are directly related; I think that's a problem with my home network. The software is telling me that my system doesn't meet minimum spec though, which is not good.

Any ideas?

 

This is being cross-posted for as much feedback as I can get.

My '12 Honda CBR600RR is nearing the end of it's life at 82,000 miles; there's minor visible scoring in the nikasil plating in the cylinders, and that's only going to get worse.

I can get the cylinders replated--assuming that the scoring is no worse than I think it is--for about $800 + the cost of shipping the block, but that would require being able to entirely rebuild the engine on my own. I'd probably want to also regrind the valve seats, replace the valves, piston heads, and def. piston rings if I did that. I've already got the cylinder head off because the valves weren't holding pressure.

I can get a replacement engine for around $1500-2500. I can replace an engine on my own, although it's a pain in the ass.

Or, I can get a new bike. But I'm not sure what makes and models for my riding style will have any better longevity than my CBR600RR has had.

My current short-list is a crashed '07- '12 CBR600RR (because I can easily swap necessary parts/bodywork, etc.), or a Yamaha YZF R6, Suzuki GSX R750, or Triumph Speed Triple 1050 (which is prone to electrical issues, and also needs some creative headlight adjustment to work with clip-on bars). Does anyone have experience with the YZF R6, GSX R750, or Speed Triple? Any issues to watch out for that might prevent any of them from making it to 100k miles without major mechanical work?

 

This is being cross-posted for as much feedback as I can get.

My '12 Honda CBR600RR is nearing the end of it's life at 82,000 miles; there's minor visible scoring in the nikasil plating in the cylinders, and that's only going to get worse.

I can get the cylinders replated--assuming that the scoring is no worse than I think it is--for about $800 + the cost of shipping the block, but that would require being able to entirely rebuild the engine on my own. I'd probably want to also regrind the valve seats, replace the valves, piston heads, and def. piston rings if I did that. I've already got the cylinder head off because the valves weren't holding pressure.

I can get a replacement engine for around $1500-2500. I can replace an engine on my own, although it's a pain in the ass.

Or, I can get a new bike. But I'm not sure what makes and models for my riding style will have any better longevity than my CBR600RR has had.

My current short-list is a crashed '07- '12 CBR600RR (because I can easily swap necessary parts/bodywork, etc.), or a Yamaha YZF R6, Suzuki GSX R750, or Triumph Speed Triple 1050 (which is prone to electrical issues, and also needs some creative headlight adjustment to work with clip-on bars). Does anyone have experience with the YZF R6, GSX R750, or Speed Triple? Any issues to watch out for that might prevent any of them from making it to 100k miles without major mechanical work?

 

This is being cross-posted for as much feedback as I can get.

My '12 Honda CBR600RR is nearing the end of it's life at 82,000 miles; there's minor visible scoring in the nikasil plating in the cylinders, and that's only going to get worse.

I can get the cylinders replated--assuming that the scoring is no worse than I think it is--for about $800 + the cost of shipping the block, but that would require being able to entirely rebuild the engine on my own. I'd probably want to also regrind the valve seats, replace the valves, piston heads, and def. piston rings if I did that. I've already got the cylinder head off because the valves weren't holding pressure.

I can get a replacement engine for around $1500-2500. I can replace an engine on my own, although it's a pain in the ass.

Or, I can get a new bike. But I'm not sure what makes and models for my riding style will have any better longevity than my CBR600RR has had.

My current short-list is a crashed '07- '12 CBR600RR (because I can easily swap necessary parts/bodywork, etc.), or a Yamaha YZF R6, Suzuki GSX R750, or Triumph Speed Triple 1050 (which is prone to electrical issues, and also needs some creative headlight adjustment to work with clip-on bars). Does anyone have experience with the YZF R6, GSX R750, or Speed Triple? Any issues to watch out for that might prevent any of them from making it to 100k miles without major mechanical work?

view more: next ›